Kinetic Technologies Announces Industry’s First USB Type-C Complete Port Protection Enabling Power Delivery to 140W with PD3.1 EPR Compatibility
Power management and video/audio interface IC leader Kinetic Technologies announced two new milestone products that can increase the Power Delivery capability of USB Type-C ports to 140W, removing the barrier to expanding the range of electronic products charged via USB. The KTS1898 is dedicated to switching and protecting VBUS power, while the KTU1128 is dedicated to switching and protecting the CC1/2 and SBU1/2 lines.
The KTS1898 is a low-resistance, 5A load switch with soft-start, overvoltage, "ideal diode" reverse-current, short-circuit, over-current, over-temperature, and ESD protection plus integrated surge protection of ±100V, designed to isolate and protect downstream components from abnormal VBUS voltage and current conditions. The fast reverse current protection (ideal diode) allows multiple power paths to be connected to VBUS OUT without interference.
The KTU1128 companion IC is a Thunderbolt compatible, Type-C USB data line protection and switch IC, providing low-resistance, ultra-fast OVP, and surge protection for the CC and SBU lines. Maintaining pin-to-pin compatibility with existing products, the KTU1128 increases the operating tolerance on CC and SBU lines to 32V for short-to-VBUS protection and reduces the quiescent current.
"The KTS1898 and KTU1128 are industry leading devices that allow designers to implement USB Type-C PD3.1 Extended Power Range (EPR) up to 140W and effectively address safety at the same time," says Erik Ogren, Kinetic Technologies Senior Director of Marketing. "With the ability to withstand up to +35V on VBUS, the KTS1898 delivers the margin our customers require to build 28V systems that are designed to be safe and reliable, while the super low-resistance 25mΩ MOSFET keeps heat to a minimum, which is essential when operating at such high-power levels. The KTU1128 features the same built-in robust protection and together extends Kinetic's lead in this application."
Key Product Highlights:
KTS1898 – 28V VBUS Protection
● 3V to 32V Operating Voltage Range
35V Abs Max. Rating at IN & OUT
● 5A Continuous Current Rating
10A peak
● Supports 140W USB Power Delivery 3.1 (EPR)
● "Ideal Diode" Reverse-current protection with 15µs fast recovery
● Full Protection: OVP, SCP, OCP, OTP & RCP
● IEC61000-4-5 Surge Protection ±100V
● IEC61000-4-2 ESD Protection ±15kV Air, ±8kV Contact
KTU1128 – 28V CC/SBU Protection
● 2.5V to 5.5V Operating Voltage Range
32V DC Tolerance on CC1/2, SBU1/2
● Thunderbolt Compatible
● Fast 70ns OVP response time
● IEC61000-4-5 Surge Protection ±40V/±30V CC/SBU
● IEC61000-4-2 ESD Protection ±15kV Air, ±8kV Contact
- +1 Like
- Add to Favorites
Recommend
- Kinetic Technologies Announces Industry’s First Qi v1.3 Certified Wireless Power Receiver KTE7000
- Kinetic Technologies’ Latest Overvoltage Protection Device KTS1676 Offers Device Protection from Surges of up to ±100V
- Eliminate the Need for TVS Diodes and Gain ESD, Surge and Overvoltage Protection for USB Type-C Ports with Kinetic Technologies‘ KTU1108
- Kinetic Technologies‘ Advanced Video Protocol Converter MCDP5200 Elevates Productivity and Gaming Experiences to New Heights
- Kinetic Technologies Introduced Highly Optimized, Ultra-Low Power MST Hub KTM5000 with DSC Support
- USB Type-C Data Line Overvoltage Protection IC KTU1001 from Kinetic Technologies Saves Power and Delivers Fastest Fault Response Time
- Kinetic Technologies’ Low RON Load Switch KTS1677A Isolates and Protects Against Abnormal Voltage and Current Conditions
- Kinetic Technologies Launches Family of LED Backlight Drivers KTD3133/4/6/7 with Single Inductor Support for Integrated Panel Camera Flash
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.