KTS1898 6ARMS VBUS ISINK Load Switch for 28V EPR Systems
■The KTS1898 is a USB VBUS safety management load switch for up to 165W current-sink input for 28V EPR systems. The input operating range is 3V to 32V with input/output withstand up to 35VDC. Ultra-fast over-voltage protection (OVP) is internally set to 33V, but optionally adjusted via external resistors. Low on-resistance minimizes heat and voltage droop. Reverse-current protection (RCP) acts as a 20mV “ideal diode” with fast recovery.
■Additional safety management includes ultra-fast over-current protection (OCP), short-circuit protection (SCP) during and after soft-start, over-temperature protection (OTP), and an integrated transient voltage suppressor (TVS) for IEC industry standard ±30kV ESD and ±100V surge ratings.
■The KTS1898 is packaged in advanced, fully “green” compliant, 2.56mm x 2.56mm, 25-bump Wafer-Level Chip-Scale Package (WLCSP).
●Features
■3V to 32V Operating Voltage Range
■35VDC Abs. Max. Rating at IN and OUT
■6A Continuous Current Rating
■24mΩ typ. On-Resistance from IN to OUT
■Soft-Start (SS) Limits Inrush Current
■Over-Voltage Protection (OVP) at IN
▲33V, 100ns Internally Fixed
▲4V to 33V External Resistor Programmable
■“Ideal Diode” Reverse-Current Protection (RCP)
▲VF = 20mV and 15μs Fast Recovery
■Short-Circuit Protection (SCP) during & after SS
■12A, 150ns Over-Current Protection (OCP)
■Over-Temperature Protection (OTP)
■Transient Voltage Suppression (TVS) at IN
▲±100V Surge Protection (IEC61000-4-5)
▲±30kV ESD Contact Discharge (IEC61000-4-2)
▲±30kV ESD Air Gap Discharge (IEC61000-4-2)
■EN (KTS1898A) or EN (KTS1898B) Enable Logic
■Hiccup Mode Auto-Retry after Faults
■ACOK Open-Drain Output Flag
■-40℃ to 85℃ Operating Temperature Range
■25-bump WLCSP 2.56 x 2.56mm (0.5mm pitch)
KTS1898 、 KTS1898AEOAE-TA 、 KTS1898BEOAE-TA 、 KTS1898A 、 KTS1898B |
|
VBUS ISINK Load Switch 、 USB VBUS safety management load switch |
|
[ Notebooks ][ Gaming PCs ][ Mini Desktop PCs ][ Docking Stations ][ Monitors ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
WLCSP;WLCSP-25;WLCSP55-25 |
|
English Chinese Chinese and English Japanese |
|
February 2024 |
|
Revision 04c |
|
|
|
2.4 MB |
- +1 Like
- Add to Favorites
Recommend
- Kinetic Technologies Announces Industry’s First Qi v1.3 Certified Wireless Power Receiver KTE7000
- Kinetic Technologies Announces Industry’s First USB Type-C Complete Port Protection Enabling Power Delivery to 140W with PD3.1 EPR Compatibility
- Kinetic Technologies’ Latest Overvoltage Protection Device KTS1676 Offers Device Protection from Surges of up to ±100V
- Eliminate the Need for TVS Diodes and Gain ESD, Surge and Overvoltage Protection for USB Type-C Ports with Kinetic Technologies‘ KTU1108
- Kinetic Technologies‘ Advanced Video Protocol Converter MCDP5200 Elevates Productivity and Gaming Experiences to New Heights
- Kinetic Technologies Introduced Highly Optimized, Ultra-Low Power MST Hub KTM5000 with DSC Support
- USB Type-C Data Line Overvoltage Protection IC KTU1001 from Kinetic Technologies Saves Power and Delivers Fastest Fault Response Time
- Kinetic Technologies’ Low RON Load Switch KTS1677A Isolates and Protects Against Abnormal Voltage and Current Conditions
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.