Yint Electronics Proposes Effective Circuit Protection Solutions for UWB Positioning Tag Circuits
UWB positioning tags (cards or bracelets, etc.) can send pulse information to the positioning base station according to the set communication protocol (such as BLE5.0) and communication frequency, thereby achieving real-time precise positioning of people or items (up to 10cm). This kind of positioning tag is powered by a rechargeable lithium battery and can be used continuously for more than 3 months. At the same time, the positioning tag can also realize the alarm and help function through the alarm button.
YINT Electronics proposes effective circuit protection solutions for UWB positioning tag circuits:
Fig.1
Power supply end: Positioning tags generally use a power supply scheme that charges lithium batteries through a USB port, which may produce surge current and instantaneous overvoltage. For surge current, it is recommended to use Yint Electronics overcurrent protection device, SMD1206-050 self-restoring fuse. For transient voltage suppression, the Yint Electronics TVS device, ESDSR05, can be used to effectively protect ESD interference from the data port.
At the same time, when the power is turned on, a momentary overvoltage may occur, affecting the MCU and sensor module. Therefore, transient voltage suppression is performed on the power supply terminals of the MCU and sensor modules.
Fig.2
Table.1
Wireless transceiver/Bluetooth 5.0 transceiver control end: It is recommended to use TVS for transient overvoltage protection.
Fig.3
Table.2
Signal input terminal: Mainly consider the alarm button. It is recommended to use ESD device ESD5V0D8B to suppress interference caused by human body static electricity, which may cause the alarm to be falsely triggered.
Fig.4
Table.3
- +1 Like
- Add to Favorites
Recommend
- Yint‘s ESDSR05-4 TVS Meet the Electrostatic Protection Design Of SIM Card Reading Circuit
- A 12V DC Lightning Protection Solution from Yint
- Yint Electronics Recommends Using a Varistor for Input Overvoltage Protection of Smart Meters
- Yint Electronics Provides Effective Circuit Protection for UWB Positioning Base Stations
- Yint Electronics MOV 14D561K, TVS SMBJ6.5CA P6SMBJ10CA for Power Line Carrier PLC Interface Circuit
- How To View The Importance Of Power Surges To The System?
- The Rise in Copper Prices And Its Impact on Electronic Component Costs
- Yint Offers ESD Protection for Smart Door Lock
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.