YINT‘s CPU and IO Interface Protection Solution
YINT‘s CPU and IO Interface Protection Solution
The Voltage Regulation Module (VRM) is used to power the processor. Due to the momentary load, the processor current may rise to 13A. At the same time, during normal operation, when the processor activity level changes, the required current still varies as much as 7A. This instantaneous demand for high current can cause component damage. Circuit protection device helps prevent damage to the processor if the VRM fails.
●RGEF、RUEF
●SMD
Fig.1
I/O Port
To meet regulatory requirements (UL60950), these ports must have the ability to interrupt or limit current flow.
●RUEF, RUSBF
●nanosMD,microsMD, minisMD,SMD
Fig.2
- +1 Like
- Add to Favorites
Recommend
- Yint Power Port Circuit Protection Device SMBJ33CA for Protection Circuit Of TIDA-01588 Series
- Yint Offers an MCU Protection Circuit Design Based on Protection Device
- Kinetic Technologies’ Latest Overvoltage Protection Device KTS1676 Offers Device Protection from Surges of up to ±100V
- The Location where the Fuse is Connected to the Circuit and Connection Method of Patch Fuse in Circuit
- What Protection Devices can be Used to Protect Set-Top Box Protection?
- High Voltage MOS/IGBT Short Circuit Protection Circuit
- Protection Circuit Of ZnO Varistor In Brushless Motor
- Reasons for The Increasing Importance of Circuit Protection Components
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.