Futureway Silicone Sealing Products Installation And Replacement Recommendations
If you have any questions about the after-sale installation and replacement of the Futureway silicone rubber sealing ring, the following content may help you in terms of ensuring product use.
Installation Method
• Before installation, check the surface condition contacted with the sealing ring to ensure that there are no burrs, pits, protrusions, cracks and other phenomena.
• When installing, do not stretch the sealing strip. Please fit the sealing groove in the natural state, and in order to balance the pressure on the sealing ring when fixing the cover, please lock the nuts on both sides of the sealing cover as much as possible.
Frequency of Replacement:
○ Not Replaced √ Replaced
Precautions when unpacking maintenance:
1. Do not remove the sealing ring from the sealing groove during the process of opening the box, otherwise replace the sealing ring in time.
2. After the cover is opened, the sealing ring should be stationary for 24 hours before closing the cover again. For specific sealing ring installation and replacement questions, please contact Futureway.
- +1 Like
- Add to Favorites
Recommend
- What Is Silicone Rubber
- What Is The Difference Between Silicone Gel And Silicone Rubber
- Silicone Rubber Products Are Becoming A Necessity of Life
- Production Process of Extruded Silicone Sponge Sealing Strip
- FUTUREWAY Launched The TIX Series of Fireproof Composite Silicone Rubber which Resists Flame Erosion up to 1000℃
- WACKER Presents Highly Adhesive Silicone Gel for Fixing Electronic Components at COMPAMED 2023
- WACKER Presents Silicone-Based Solutions for Electromobility and Medical Applications
- Silicon Labs Simplifies IoT Development with Simplicity Studio 5
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.