Uses of Silicone Adhesive
Silicone glass glue does not flow due to its own weight, so it can be used in the joints of overhead or side walls without sagging, collapsing, or running away. It is mainly used for bonding dry and clean metal, glass, most grease-free wood, silicone resin, sulfurized silicone rubber, ceramics, natural and synthetic fibers, and many painted plastic surfaces. Good quality silicone glass glue will not be extruded or change physical properties when used below zero degrees Celsius. Fully cured silicone glass glue can remain effective when used at a temperature of 204℃ (400℉), but the effective time will be shortened when the temperature is as high as 218℃ (428℉).
1. It is suitable for sealing, blocking, leak-proofing and weather-proof purposes. It is suitable for both indoor and outdoor (the indoor effect is better), and the anti-seepage and leakage prevention effect is obvious. 2. Bonding various interior decorations of automobiles, including metal, fabric, organic fabric, and plastic. 3. Join the gaskets on the heating and cooling equipment. 4. Install ribs without screw holes, nameplates, and paint and plastic materials on the metal surface. 5. Seal the window on the oven door, the flue on the gas appliance, the pipe joint, and the passage door. 6. Provide instant-shaped anti-leak pads for gearboxes, compressors, and pumps. 7. Seal the cabin and window. 8. Sealing of glass windows in trailers and truck cabs. 9. Glue and seal equipment parts. 10. Form anti-wear coating. 11. Inlay and fill thin metal sheet stacks, pipe networks, and equipment casings.
1. Suitable for weather-resistant sealing of various curtain walls, especially recommended for weather-resistant sealing of glass curtain walls, aluminum-plastic panel curtain walls, and stone dry hanging; 2. Joint sealing between metal, glass, aluminum, ceramic tiles, plexiglass, and coated glass ; 3. Seam sealing on the surface of concrete, cement, masonry, rock, marble, steel, wood, anodized aluminum, and painted aluminum. In most cases, no primer is needed.
1. Mainly used for structural or non-structural bonding assembly between metal and glass of glass curtain wall. 2. It can directly connect the glass and the surface of the metal component to form a single assembly component, which can meet the design requirements of the curtain wall with a full or semi-hidden frame. 3. Structural bonding and sealing of insulating glass.
- +1 Like
- Add to Favorites
Recommend
- Classification of Silicone Adhesive
- Silicone Glass Glues Restrictions
- Silicon Labs Simplifies IoT Development with Simplicity Studio 5
- Silicon Labs Z-Wave Wireless Selected for Johnson Controls Next Generation Qolsys Smart Home Panel
- Silicon Labs Strengthens Isolated Gate Driver Portfolio
- News | Silicon Labs and Amazon Collaborate on Sidewalk, a New Shared Network for IoT Consumer Devices
- Silicon Labs Expands Isolated Gate Driver Product Family Ideal for Hybrid and Electric Vehicles (EV)
- Software Speeds Development of IEEE 1588 System Integration | Silicon Labs
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
