More power for supercapacitors – with the aid of Wevo potting compounds

2023-10-01 Wevo News
potting compounds,PowerBlocks,WEVOPUR 512 FL,Wevo

Due to the ongoing advancement and growth of hybridization and electrification, energy storage is now a significant and innovative area of development. In areas where large amounts of energy need to be delivered at short notice, supercapacitors offer decisive advantages over conventional electrolytic capacitors and metal hybrid or Li-ion batteries. By using potting compounds from WEVO-CHEMIE GmbH, capacitor manufacturer WIMA GmbH & Co. KG not only benefits from a high degree of flexibility in the design and production of its supercapacitor packs and modules but is also able to significantly improve their performance. The optimized thermal conductivity of the potting compound allows an increase in electrical capacity without leaving the optimum temperature range – this also results in a longer service life. 

Image: WIMA supercapacitor “PowerBlock“ potted with WEVOPUR 512 FL (blue)


As short-term storage devices in hybrid cars, supercapacitors increase their efficiency; in buses or trains, they use the energy generated during braking for propulsion; and in the event of power failures, they can provide the very high amounts of energy needed immediately. The uses for supercapacitors – also known as supercaps or ultracapacitors – are already diverse, and these components are becoming more and more important. This is because they are filling the gap between conventional capacitors and storage batteries, i.e. rechargeable batteries.


On the one hand, supercapacitors can store extremely large amounts of energy and charge – more precisely, 10 to 100 times as much as electrolytic capacitors. On the other hand, contrary to rechargeable batteries, this energy is charged or discharged in a flash when required. This is thanks to the fundamentally different way in which they store energy: while rechargeable batteries store energy by electrochemical means, and consequently, charging and discharging is relatively slow, storage in capacitors takes place directly as an electrical charge. Supercapacitors can therefore be used wherever large amounts of energy need to be discharged at short notice. 


BENEFITS FROM USING WEVO POTTING COMPOUNDS IN THE PRODUCTION OF WIMA POWERBLOCKS

WIMA, a leading German specialist in film capacitors, uses these benefits in the so-called supercapacitor “PowerBlock” – cascaded, double-layer capacitor modules whose capacitance, rated voltage, and dimensions can be individually adapted to the respective application. This allows a wide range of applications, for example in the mobility sector, for engine starter modules in large construction and agricultural machinery, ships, locomotives, trams, and buses, and for applications in the energy sector, such as slip controls for wind turbines or generators in emergency power systems.
 
The individual supercap cells of the PowerBlock are fixed symmetrically to the base and at the lid of the housing with the help of Wevo’s WEVOPUR 512 FL potting compound. This facilitates customization of the construction and innovative design of the PowerBlock. The polyurethane resin functions as a cell holder, which previously had to be manufactured and adapted to the construction form of the cells separately. In addition, the cells are protected from shocks, oscillations, and vibrations due to the tough mechanical properties of the potting compound. 


SAFETY AND INCREASED PERFORMANCE WITH THE AID OF WEVO POTTING COMPOUNDS

Furthermore, the cells are bonded directly to the metal surfaces of the housing. The direct encapsulation allows the thermal surface resistance to be minimized and the thermal conductivity of 0.8 W/mK to be optimally used to dissipate the thermal energy during operation. At the same time, electrical insulation is provided between the cells and the metal housing. The good dissipation of thermal energy lowers the operating temperature, prolongs the service life, and ensures low-maintenance operation with up to one million charge and discharge cycles. 


With the high charges and energy levels of up to several thousand watts that can be delivered for short periods, electrical safety is ensured by the high tracking resistance, surface resistance, and dielectric strength in the PowerBlock. In addition, the potting compound is self-extinguishing in line with UL 94 V-0 and certified according to railway fire protection standard EN 45545-2. As a result, it reduces the risk of fire and protects the PowerBlock against what is known as “thermal runaway”.

  • +1 Like
  • Add to Favorites

Recommend

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Contact Us

Email: