Universal Programmer AP8000 Supports Programming of Nuvoton‘s Low-voltage Microcontroller M031TC1AE

PublishTime： 2023-09-14 Article Source：PTCHIP News Author：芯录微半导体（苏州）有限公司

Core Recording Micro Semiconductor recently released the latest programming software update and a list of newly supported chip models, among which the programming of Nuvoton's low-voltage microcontroller M031TC1AE has been replaced by Supported by the recording platform AP8000.

M031TC1AE is a low operating voltage microcontroller based on Arm^® Cortex^®-M0 core, with 32-bit hardware multiplier/divider, operating frequency up to 48MHz, operating voltage of 1.8~3.6 V, equipped with 32KB Flash and 4KB SRAM.

With its specially designed performance, such as 2 MSPS ADC, 96MHz PWM, 24MHz SPI, and 6MHz UART. It can be used in industrial control and consumer applications, allowing fast and accurate conversion of voltage, current, and sensor data, and fast response and control of external modules, such as current or voltage feedback from motor control or sensing devices.

M031TC1AE also provides a large number of peripherals, including 3 sets of UART, 1 set of SPI/I²S, 2 sets of I²C, 10 channels of 12-bit ADC, 6 channels of 16-bit PWM, etc., which can meet various application requirements. It can work in a wide temperature range of -40℃~+105℃. The whole series of the same package is Pin-to-Pin compatible.

Internal block diagram

The AP8000 universal programmer independently developed by Core Recording Micro Semiconductor includes three parts: the host, the base plate, and the adapter seat.

The host supports USB and NET connections, allowing multiple emmc programmers to be networked to achieve the purpose of simultaneously controlling multiple programmers to burn at the same time. The built-in chip safety protection circuit ensures that even if the chip is reversed or a short circuit is caused by other reasons can be detected immediately and the power is turned off to ensure the safety of the chip and programmer. Embedded high-speed FPGA greatly accelerates data transmission and processing. There is an SD card slot on the back of the main unit. Put the project file produced by the PC software into the root directory of the SD card and insert it into the card slot. The project file can be selected, loaded, and burned through the buttons on the programmer. command, in order to achieve the purpose of operating without a PC, which greatly reduces the cost of PC hardware configuration, and can be conveniently and quickly matched with the working environment.

AP8000 makes the mainframe more expandable through the backplane and adapter board. Currently, it has supported devices produced by all mainstream semiconductor manufacturers. Supported device types include NAND, NOR, MCU, CPLD, FPGA, EMMC, etc., and support file formats including Intel Hex, Motorola S, Binary, POF, etc.

+1 Like
Add to Favorites

This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.

Recommend

Universal Programmer AP8000 Supports Programming of INGCHIPS‘ Low-power Bluetooth SoC Chip ING91880C

2023-11-01 - Product Introduction Core Recording Micro Semiconductor released the latest programming software update and a list of newly supported chip models. Among them, the low-power Bluetooth SoC chip ING91880C of INGCHIPS Taoxin Technology has been adopted by Core Recording Micro‘s general programming platform AP8000.

Universal Programmer AP8000 Supports Programming TI‘s 32-Track PMBus Power Sequencer and System Manager UCD90320ZWSR

2023-09-13 - Product Introduction Core Recording Micro Semiconductor released the latest programming software update and a list of supported chip models, among which TI Texas Instruments‘ 32-track PMBus power sequencer and system manager UCD90320ZWSR has been adopted by Core Recording Micro‘s general Supported by the burning platform AP8000.

Acroview Programmer AP8000 to Support the Programming of AdvanceChip‘s 32-bit Fixed-point Digital Signal Processor ADP32F035QP80S

2023-09-16 - Product Introduction Core Recording Micro Semiconductor recently released the latest programming software update and a list of newly supported chip models. Among them, the 32-bit fixed-point digital signal processor ADP32F035QP80S of AdvanceChip has been adopted by Core Recording Micro‘s general programming platform AP8000.

Universal Programmer AP8000 Supports Programming TI‘s 32-bit Microcontroller TMS320F28377DPTPT

2023-09-01 - Product Introduction Core Recording Micro Semiconductor recently released the latest programming software update and a list of newly supported chip models. Among them, the 32-bit microcontroller TMS320F28377DPTPT of TI Texas Instruments has been supported by Core Recording Micro‘s automated chip programmer platform AP8000.

Universal Programmer AP8000 Supports Programming FuDanWei‘s Serial Flash Memory FM25Q16A

2023-09-10 - Product Introduction Core Recording Micro Semiconductor recently released the latest programming software update and a list of newly supported chip models. FuDanWei‘s serial flash memory FM25Q16A has been supported by Core Recording Micro‘s general programming platform AP8000.

Acroview Programmer AP8000 Support the Programming of TI Texas Instruments Fuel Gauge BQ27500DRZR-V130

2023-08-26 - Product Introduction The programming of TI Texas Instruments power meter BQ27500DRZR-V130 has been programmed by Core Recording Micro‘s general programming platform AP8000.

Acroview universal programmer heavyweight IC programming of the 32-bit microcontroller N32G4FRREL7

2023-02-03 - Product Introduction The AP8000 makes the host more scalable by adding an adapter board to the backplane. At present, it has supported all devices produced by mainstream semiconductor manufacturers, including TI, ST, MicroChip, Atmel, Hynix, Macronix, Micron, Samsung, Toshiba, etc.

Acroview Automated Chip Programmer Software Support the Programming of Haawking‘s Digital Signal Processor HXS320F28027PT*-ECD

2023-08-19 - Product Introduction Acroview Technology recently released the latest programming software update and a list of newly supported chip models, among which Haawking‘s digital signal processor HXS320F28027PT*-ECD has been programmed by Acroview‘s general-purpose Platform supported by AP8000.

Core Recording Micro‘s General Programming Platform AP8000 Support Programming TI‘s 32-bit Microcontroller TMS320F28066PZ

2023-08-23 - Product Introduction Core Recording Micro Semiconductor recently released the latest programming software update and a list of newly supported chip models. Among them, the 32-bit microcontroller TMS320F28066PZ of TI Texas Instruments has been supported by Core Recording Micro‘s general programming platform AP8000.

At the time of setting sail, ACROVIEW Technology was awarded the recognition of Shenzhen‘s spec

2022-09-27 - Manufacturer News With its innovative design, strong research and development, excellent service capabilities, and extensive brand influence in the field of chip burning, ACROVIEW Technology stands out. Its AP8000 universal burner platform provides one-stop solutions in the semiconductor and electronic manufacturing fields.

ACROVIEW Programmer Supports Chip Programming of AdvanceClip‘s 32-bit fixed-point digital proce

2022-10-27 - Manufacturer News Ongke Technology, the leader in the chip programming industry, recently released the latest programming software update and the list of newly supported chip models. Among them, the burning of AdvanceClip‘s 32-bit fixed-point digital processor ADP32F12A-150BG has been supported by Programming‘s general Programmer platform AP8000.ADP32F12A-150BG is a high-performance 32-bit fixed-point digital processor with low power consumption and high performance. Built-in a variety of memories and rich peripherals, with a wide range of applications. It is used in industrial intelligent control, Internet of