PREMO Launches The MICUs – NB & BB Series for Non-intrusive Inductive Coupler
This innovation is designed for a combined use of narrow-band and broad-band communication in the same inductive coupler.
PREMO, the leading manufacturer of inductive components, announces this extensive MICU devices family to cover a wide frequency range for power line communications in Smart-Grid applications and to use in the development of EV-charging stations for communication protocol diagnosis.
The main advantages of these inductive couplers are:
Non-Intrusive (no disconnect cables, terminals, etc.)
Easy to use (and installation). Clamp, click and connect (<5s)
Can wrap cables up to 45mm diameter (current capability up to 300Arms)
High insulation voltage
Narrow band operation (30-600kHz) for long-distance communications
Broad band operation (1~2MHz – 40MHz) for short and medium distance communication
NB & BB combined (NB for Long-distance and BB for short distance)
Power line communications (PLC) is a global technology that is gaining interest worldwide due to the wide availability of power distribution lines. In smart grids inductive couplers are playing a big role. They transmit the communication signals between MV-Substations and MV-Sub to concentrators, avoiding other special transmission network, such as FO, Coaxial, Radio, etc., being a competitive solution compared with capacitive coupling.
Smart Grids require the deployment of bidirectional communication links that interconnect the nodes of the grid. Power line communication (PLC) is a technology able to do that, and it potentially reduces the investment cost by exploiting the existing grid infrastructure.
PLC can be used to offer a number of services in the grid through digital monitoring to control for fault detection, power quality and islanding effects. Energy management allows decentralized production and control of storage and electrical vehicles charge. Smart metering is the key component for demand side and demand response management. Smart building solutions can be put forth with automation and control inside buildings.
PLCs are a natural choice to deliver bi-directional connectivity in the power delivery grid.
PREMO has developed a wide range of MV-Inductive couplers:
Table 1
Two different high performance magnetic core materials are used, depending onthe frequency band and magnetic saturation (ferrite high permeability for broadband communication (high frequency)) and amorphous material for narrowband communication (low frequency).
This helps to improve communication efficiency as it offers low insertion losses.
MICU 300 A-S/LFW/OH (NB-series: 30-600kHz)
All inductive couplers are suitable for listen CCS (Combined Charging system) communication protocol between a charging station (EVSE) and an electric vehicle (EV): ISO/IEC 15118, DIN70121 and IEC 61851-1.
Non-intrusive solution (by PLC sniffer: MICU 300A) for monitoring PWM basic communication parameters
- +1 Like
- Add to Favorites
Recommend
- Premo New Technology Reduces Emitter Antennae Length by 50% for Automotive Electronics.
- Receiver Antennae (Secondary Coil) That Provides Super High Efficiency (above 95%) Power Transfer | PREMO
- Premo Takes Wireless Charging Antennas Tx/Rx for EV to PCIM Europe 2022
- The Lowest Profile 3D Antenna Coil Available in The Market | PREMO
- PREMO Launches the Pushbutton Switches, the Most Innovative for Automotive and Harsh Environment
- Premo Nanotech Magnetic Materials Allow Long Flexible Emitter Antennae for Automotive Electronics
- Premo’s 50KW Off Board Charger Transformer with Embedded LLC Resonant Choke, Delivering Power with over 99% Efficiency
- PREMO Releases New Passive Keyless Entry Providing up to 5 times More H-field than Standard Antennas
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.