How to Distinguish MTP and MPO Fiber Jumpers?
MTP and MPO fiber jumpers have connectors at both ends and are ideal for high-density cabling systems and cable management cabling that require space savings. The difference between fiber jumper MTP and MPO is their connector, which will be introduced in more detail.
Although MTP fiber jumpers can directly interconnect with MPO fiber jumper based cabling systems, MTP and MPO fiber jumpers differ in connector type, ferrule, guide pin, detachable housing, and performance.
1. Connector type of MTP and MPO
An
MPO connector is a connector with at least 8 fibers designed to provide
multiple fibers in one connector. It complies with IEC 61754-7 and
TIA-604-5 standards in the United States and is ideal for high bandwidth
and high-density cabling system connections.
The MTP connector, manufactured by USConec is an improved version of the MPO connector, so the MTP connector is fully compatible with a general-purpose MPO connector and can be directly interlinked with a cabling system based on the MPO fiber jumper. However, compared to the ordinary MPO fiber jumper connector, the connector of the MTP fiber jumper can improve the optical and mechanical performance.
2. MTP and MPO latch clip
MTP fiber jumper connectors are usually equipped with metal latch clips that better fasten the pins to minimize accidental breakage during use, while MPO fiber jumper connectors are equipped with plastic latch clips that may cause the pins to break during use.
3. MTP and MPO ferrule
MTP fiber jumper connectors have ferrules for improved mechanical properties. In other words, the floating ferrules of the MTP fiber jumper connector can float internally to maintain a stable connection even when a load is applied. However, the MPO fiber jumper connector does not have a floating ferrule.
4. MTP and MPO guide pin
When two MT ferrules are used together, the guide pin is essential for accurate alignment. MTP and MPO fiber jumper connectors also use different guide pins. MTP fiber jumper connectors use tightly secured stainless steel circular guide pins to reduce debris on the guide hole and ferrule ends. MPO fiber jumper connectors have cylindrical guide pins, which may produce debris during use.
- +1 Like
- Add to Favorites
Recommend
- What Are the Differences Between MTP and MPO Connectors?
- A Comprehensive Introduction to the Types, Male-Female, and Key Classification of MPO and MTP Fiber Optic Patch Cords
- Detailed Introduction of Fiber Jumper Interface Types PC, APC, UPC
- The Difference Between Armored Jumper and Ordinary Fiber Optic Jumper
- What Are Simplex and Duplex Fiber Patch Cords?
- Cleaning Fiber Optic Adapters is a Mandatory for Jumper Installers
- CrimpFlex™ Jumper Cables Allow a Better Retention Compared to FFCs Used with ZIF/LIF Connectors
- What Are the Components of Internet of Things?
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.