Bluetooth Wi-Fi Module from Feasycom that Supports Wi-Fi Alliance Certification: FSC-BW236 and FSC-BW104
The WiFi Alliance owns and controls the "WiFi Certified" logo, a registered trademark, which is permitted only on equipment that has passed testing. If you have passed the Wi-Fi Alliance (WFA) certification, you can put the Wi-Fi logo on your product to indicate that your wireless product meets certification items such as Wi-Fi compatibility. In this article FEASYCOM will introduce what WiFi alliance is, the Wi-Fi certified, and Bluetooth Wi-Fi modules FSC-BW236/FSC-BW104 that support Wi-Fi alliance certification.
Difference between IEEE and Wi-Fi Alliance
The IEEE and FCC are responsible for the Layer 3 protocol support and frequency and power level regulations in the United States. ETSI and TELEC are responsible for frequency and power-level regulations in Europe and Japan. The WiFi Alliance is responsible for interoperability testing.
What does the Wi-Fi Alliance certification test?
Interoperability:
Verify the interconnection and interoperability between the test equipment and the standard equipment of different chip manufacturers on the test platform.
Throughput:
The test case defines the user scenarios and throughput limit requirements of different working modes such as single-user, multi-user, and Wi-Fi802.11a/b/g/n, and tests the throughput performance of the device under test.
Protocol consistency:
Encryption mode (WPA2-AES, WPA-TKIP, WEP);
802.11n equipment protection measures for 802.11b and g equipment,
802.11g equipment protection measures for 802.11b equipment;
802.11n protocol.
Feasycom focuses on the research and development of IoT products and services. Feasycom has its own Bluetooth& Wi-Fi stack implementations and provides a one-stop solution. Rich solution categories cover Bluetooth, Wi-Fi, Sensor, RFID, 4G, Matter/Thread, and UWB technologies.
Wi-Fi Alliance Module
Below Bluetooth Wi-Fi module from Feasycom that supports Wi-Fi Alliance Certification:
FSC-BW236
RTL8720DN Chip
BLE 5 & Wi-Fi Combo Module
802.11 a/b/g/n
2.4 GHz & 5 GHz
13mm x 26.9 mm x 2.2mm
Support WPA3 security network
CE、FCC、IC、KC、TELEC certification
Wi-Fi Alliance certification
RTL8720DN Chip Bluetooth Wi-Fi SoC Module 2.4G+5G | FSC-BW236
FSC-BW104
QCA6574A Chip
Bluetooth 5.0+EDR
802.11 a/b/g/n/ac
2.4 GHz & 5 GHz
23.4mm x 19.4mm x 2.3mm
Support WPA2/WPA3 security network
Support Android/Linux System
Wi-Fi Alliance certification
Cost-effective Automotive Grade QCA6574A Wi-Fi Bluetooth Module | FSC-BW104
- +1 Like
- Add to Favorites
Recommend
- Feasycom Introduction RFID Smart File Management System with Standby Power Consumption <8W
- How to Configure the Profile of Feasycom Bluetooth Audio Module by AT Commands?
- Feasycom Launched the Genuine LE Audio Module FSC-BT631D and Solution
- Feasycom Honored to Join FiRa Consortium as An Adopter Member to Promote The Innovation and Application of UWB Technology
- Feasycom‘s LE Audio Solution Shines at EXPO COMM Wireless Japan 2024
- Feasycom Showcases Latest Wireless Modules at the UK’s Largest Electronics Exhibition
- Feasycom Launched RFID Librarian Workbench Featuring Reading and Writing Rate of up to 50 Tags/second
- Reimagine Your Audio Experience with Feasycom FSC-BT631D LE Audio Bluetooth Module — Unleash the Power of LE Audio
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.