The Features and The Network Connection Method of ESP8266 WiFi Module
ESP8266 WiFi module series is a cost-effective WIFI SOC module. It supports standard IEEE802.11b/g/n protocol and has a built-in complete TCP/IP protocol stack. Users can use this series of modules to add network functionality to existing equipment or to build stand-alone network controllers. Today SKYLAB will talk about the features of ESP8266 and the network connection method of its WiFi module.
What are the features of the ESP8266 module series?
●Support STA, AP, STA+AP action mode
●Very small 802.11b/g/n WiFi SOC module
●Built-in 10bit high precision ADC
●Using a low-power 32-bit CPU that doubles as an application processor
●Support USART, GPIO, IIC, PWM, ADC, SPI and other interfaces
●The maximum clock frequency is 160MHz
●Support smart config, AirKiss one-click network
●Support multiple sleep modes, deep sleep current as low as 20μA
●Embedded LWIP protocol stack
●Support SDK secondary development
●General AT commands can be used quickly
●Support serial local upgrade and remote firmware upgrade (FOTA)
What is the network connection method of the ESP8266 WiFi module?
If the phone is connected to WiFi, it's pretty simple. First turn on the WIFI switch, select the WIFI network and then enter the password.
Second, if the number of devices is large, the account and password cannot be entered individually for each device.
For these needs, ESP8266 supports smart config mode. The user connects the ESP8266EX and ESP32 devices to the WiFi network and only needs to operate the mobile phone to realize the intelligent structure.
In addition, when we apply the WIFI module to various occasions, there are various WIFI network account names and passwords. Passwords are also constantly updated, and accounts and passwords cannot be fixed.
In response to these requirements, ESP8266 supports smart config mode, users connect devices using ESP8266EX and ESP32 to WiFi network, and users can realize an intelligent structure with a simple operation on mobile phones.
Which ESP8266 WiFi modules are recommended?
SKYLAB product model is recommended: WG219 / WG229. This series module mainly adopts ESP8266 chip and supports AP mode or Station mode, which can be used for LED control, smart home networking, smart socket, etc.
- +1 Like
- Add to Favorites
Recommend
- SKYLAB‘s ESP8266 WiFi Module Revolutionizes Your Projects with Its Extensive Community Support and Affordability
- Differences and Development Methods Between ESP8266 and NodeMCU
- Application Of ESP8266 WIFI Module In Smart Socket
- ESP8266 WiFi Module WG219 and WG229 Available on LED Controll , Speed up to 72.2Mbps
- What Are The Applications of ESP8266 WiFi Module?
- ESP8266 WIFI Module WG219 and WG229 for Smart Home Applications Compliant with 802.11b/g/n Wireless Module Standards
- What are the Functions of the Smart Construction Site Personnel Positioning System?
- SkyLab WiFi Module WG219 for Smart Door Lock Solution with Remote Monitoring Function
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.