Rj45 Patch Cord – Now Fire-protected and for Use in Particularly Harsh Environments
The decision on which copper patch cord is the ideal solution for connecting end devices depends on several factors: The application area, durability, and transmission speed are just some of the crucial factors.
Whatever you decide, with copper patch cords from METZ CONNECT, optimally tailored to the requirements of all structural levels of local networks, you are sure to be on the safe side for the futur!
METZ CONNECT patch cords are always used where high-speed data transmission in local networks (LAN) is required. The patch cords are used for structured and application-neutral networks – Ethernet 100BaseT, 1000BaseT and 10 GBit Ethernet. In addition to voice and data communication, our solutions for remote powering of various end devices using Power over Ethernet and high-end video, e.g. B. HDBaseT suitable.
Patch cord CPR Fireprotect
RJ45 C6A AWG26 S/FTP LSHF, white
METZ CONNECT CPR patch cords are fully shielded and designed for transmission speeds up to 500 MHz and are particularly suitable for unshielded and shielded Class EA systems.
Due to the cable type used: S / FTP 4x2xAWG 26 PIMF with halogen-free and CPR Class Cca s1a d1 a1 cable sheath, they contribute significantly to preventing the spread of flames in the event of a fire!
Description
* CPR-optimized patch cords with raw material of the fire class Cca s1a d1 a1
* particularly suitable for unshielded and shielded Class EA systems
* two shielded RJ45 plugs, wiring 1-1
* Cable type: S / FTP 4x2xAWG 26 PIMF
* Cable sheath: LSHF (LSOH) white, halogen-free
* suitable for 10 GBit / s Ethernet (IEEE 802.3an) up to 60 m
* Remote powering (PoE, PoE plus and UPoE) suitable
* Suitable for VoIP, multimedia, broadband video
* Kink protection injection molded with integrated locking lever protection
6kV Flex500 Outdoor patch cord, black
METZ CONNECT 6kV Flex500 outdoor patch cords are robust patch cords that are particularly suitable for use in drag chains and for use in harsh industrial environments, in meter cabinets and outdoor applications.
Due to their cable structure, these patch cords are very flexible, designed for small bending radii and a large number of bending cycles. Can be used in drag chains and is suitable for constantly moving applications on machines and systems.
Equipped with a resistant UV-resistant PUR outer jacket, the cables are insensitive to chemical stress and light. This also makes them suitable for outdoor use. For example, to connect a surveillance camera.
By complying with VDE-AR-N 4100: 2019-04 (6kV surge voltage test according to DIN EN 60664-1), laying in the meter space and electrical distributors is possible!
Description:
* RJ45 patch cords for industrial and outdoor applications
* Shielded Cat.5e, Class E [A] RJ45 patch cords
* Compliance with class EA channel link according to ISO / IEC 11801-1, DIN EN 50173-1
* tested: channel link up to 500 MHz
* suitable for 10 GBit / s Ethernet (IEEE 802.3an) up to 40 m
* particularly suitable for unshielded and shielded Class EA systems
* Robust and abrasion-resistant cable for industrial use, such as in mechanical and plant engineering. Also suitable for laying outdoors
* Compliance with VDE-AR-N 4100: 2019-04 (6kV surge voltage test according to DIN EN 60664-1) when laying in the meter space and electrical distributors
* Cable type: S / UTP 4x2xAWG24 / 7
* Cable sheath LSHF (FRNC) PUR, black
* Suitable for drag chains
* two shielded RJ45 plugs, wiring 1 - 1
* UV, oil resistant
* Remote powering (PoE, PoE plus and UPoE)
* suitable for IoT, M2M, IoT, HDBaseT, Industry 4.0, multimedia, broadband video
* Overmolded anti-kink sleeve
* significantly longer shelf life than standard patch cords
* very short anti-kink sleeve
Range of applications for the patch cord RJ45 C6Flex500:
* Industrial automation
* machine tools and equipment
* drag chain and energy chain
* Industrial trucks
* moving applications
* outdoor applications (IP camera)
* special applications
* meter place and electrical distributor
Order number code:
The patch cords are ready-made with RJ45 plugs and available in different lengths. Intermediate lengths and special assemblies can also be configured using our cable configurator.
- +1 Like
- Add to Favorites
Recommend
- German connector brand METZ CONNECT reached a partnership with Sekorm
- METZ CONNECT Offers Customizable Smart Cabling Solution for Intelligent Meter Systems
- METZ CONNECT‘New OpDAT MTP® Cable Assemblies with Transmission Rates Up to 40 or 400GBit/s
- METZ CONNECT Connection Terminals Alternate to RJ45 Or M12 Connectors, Suitable For Industrial Ethernet Systems
- Control Cabinet Construction 4.0 – Digital Device Data from METZ CONNECT
- Reconnectable METZ CONNECT Terminals Suitable for IoT/IIOT Devices, up to 10 Gbit/s Data Transmission
- METZ CONNECT Joined the Single Pair Ethernet Industrial Partner Network with Its IEC 63171-6 SPE Connectors
- METZ CONNECT One And Two Port “APZ“ Junction Boxes Products With Feedthrough Couplings, Plug + Play Connection
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
