A Single Cell Lithium-Ion Battery Charger Using a Constant-Current/Constant Voltage Algorithm-A4055
The AiT A4055 is a single cell Lithium-Ion battery charger using a constant-current/constant voltage algorithm. It can deliver up to 800mA of charge current with a final float voltage accuracy of 1%. The A4055 includes an internal P-channel power MOSFET and thermal regulation circuitry.
The A4055 is capable of operating from a USB power source. A4055 IC is best suitable for USB charging applications such as Mobile Phones, PDAs, Charging Docks, Mobile POS etc.
Below is an example of A4055 application. A4055 Battery Charger IC can be use in Charging circuit of Mobile POS machine for charging Single Cell Lithium Ion battery directly from USB port.
The A4055 can be put into shutdown mode, reducing the supply current to 25μA.Other features include charge current monitor, under-voltage lockout, automatic recharge and as status pin to indicate charge termination and the presence of an input voltage.
Features
• Programmable Charge Current Up to 800mA
• No MOSFET, Sense Resistor or Blocking Diode Required
• Preset 4.2V Charge Voltage with ±1% Accuracy
• Charge Current Monitor Output for Gas Gauging
• Thermal Regulation Maximizes Charge Rate Without Risk of Overheating
• Charges Single Cell Li-Ion Batteries directly from USB Port
• Over-Voltage Protect
• Automatic Recharge
• Charge Status Output Pin
• C/10 Charge Termination
• 25μA Supply Current in Shutdown
• 2.9V Trickle Charge Threshold
• Soft-Start Limits Inrush Current
• Available in SOT-25 Package
Typical Application
600mA Application Circuit
- +1 Like
- Add to Favorites
Recommend
- AiT A6303 Series——300mA, Positive Voltage Output CMOS LDO Regulators
- AiT offers 1A Linear Li-ion Batteries Charger IC A4051 for Single-cell Lithium-ion Batteries
- AIT A6528A CMOS LDO Features A Low Voltage Difference and Is Available in SOT-25 and SOT89-5 Packages
- 512Kbit I²C Compatible Serial EEPROM AiT A24C512 Requires a Single Power Supply in the Range of 1.7V to 5.5V
- AiT A7545 current mode boost DC-DC converter with Adjustable Output up to 9V and Internal Fixed PWM frequency of 1MHz
- AiT A713 DC-to-DC Step-down Switching Regulator with High Efficiency of up to 95%, ideal for Low-voltage Power Conversions
- AiT Offers Wide Range of Highly Precise SMD/TH Crystal Components in Half Size, Full Size, Cylindrical and Tuning Fork Packages
- AiT Offers Compact SMD Power Inductors Available in SMD Size Range from 0602 to 1812
This document is provided by Sekorm Platform for VIP exclusive service. The copyright is owned by Sekorm. Without authorization, any medias, websites or individual are not allowed to reprint. When authorizing the reprint, the link of www.sekorm.com must be indicated.