If USB VBUS is used to power the chip, what voltages can be present when the USB cable is unplugged?
Published：2024-04-16
-
- 用户_5489 (0)
- When the USB cable is unplugged, any voltage present on the I/O pins will back-feed the FTDI CHIP through its protection DIODES and partially power it. This is an unknown state. Damage will not occur; however, the RESET# input will need driven with a low Pulse in order to recover. To avoid this scenario, ensure that the I/O voltages are kept at zero while the USB cable is not connected, or use external buffers that allow signals without power present.
- Published：2024-04-16
Recommend
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
