Datasheet CleO35-WIFI Module
●Introduction
■The CleO35-WIFI module is a Wi-Fi accessory for the CleO series – the smart TFT display for Arduino. Designed with an ESP-12S Wi-Fi module from Ai-thinker using core processor ESP8266, the ESP8266 is among the most integrated Wi-Fi chips in the industry. Measuring just 5mm X 5mm, it requires minimal external circuitry and integrates a 32-bit Tensilica MCU, digital peripheral interface, antenna switch, RF balun, power amplifier, low noise receive amplifier, filters and power management modules all in one small package.
■The CleO35-WIFI module comes with a standard 16 pin 0.5mm pitch FFC cable, suitable for connecting directly to CleO35 modules or via the CleO_IO Shield to CleO50 modules enabling wireless communications to the system.
■As a plug in accessory to CleO it extends the CleO modules capabilities to include wireless monitor and control for smart devices around the home.
●Features
■The CleO35-WIFI consists of ESP-12S WIFI module developed by Ai-thinker using an ESP8266. In addition, CleO35-WIFI has the following features:
▲Supports standard IEEE802.11 b/g/n
▲Integrated low power 32-bit MCU
▲Wi-Fi 2.4GHz, Support WPA/WPA2
▲Support STA/AP/STA+AP operation mode
▲+20dBm output power in 802.11b mode
▲On board PCB antenna
▲Compatible with Bridgetek CleO35
▲16 Pin 0.5mm Pitch FFC Flex interface
CleO35-WIFI 、 ESP8266 、 CleO35 、 CleO35-WiFi1 、 ESP-12S 、 CleO |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2017-06-09 |
|
Version 1.0 |
|
BRT_000117 |
|
571 KB |
- +1 Like
- Add to Favorites
Recommend
- Bridge Monitoring Made Easy with IBridge Based on ElastiSense Two Sensors DS100
- What Is Industrial Router and Bridge?what Are the Differences Between Them?
- Bridge Monitoring in Greece Used Six Elastisense Sensor Technology DS Displacement Sensors
- The DS-Series Displacement sensors from ElastiSense are developed especially for bridge, adding safety and reducing costs
- ElastiSense‘s Partnership with Smart Sensor Systems from Norway Offering the State-of-the-art Data Logger, iBridge
- Measure the Quality of Rectifier Bridge Reactor with 8 Steps
- Shindengen Announces a Launch of High Current, High Withstand Voltage Bridge Diodes with a 60% Increase in Rated Current
- Dual-channel H-bridge Motor Driver Chip AT8813, 2.5A Drive Output
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.