Si834x –Quad PLC Output Driver

2019-05-25
The Si834x-IF provides four output drivers for 24 V based inductive loads such as solenoids and relays used in PLC based

control systems with integrated safety rated isolation of 2.5 kVrms. The Si834x-IS are non-isolated drivers. The input interface

is based on Silicon Laboratories’ ground breaking CMOS based isolation technology which enables easy interface to low voltage

2.25V MCU’s and the ability to accommodate high data rates of up to 1 Mbps for servo motor control on some product options.

This technology enables high CMTI (25 kV/µs), reduced variation with temperature and age and tighter part-to-part matching.

The outputs provide a continuous 0.7A drive capability for either high side or low side inductive loads, depending on the product

option. These have integrated active clamps to minimize transients and protect the drivers when switching such loads.

Product features include over-current and over-temperature detection and shutdown circuit and diagnostic capability for detecting

open wires when in OFF state and short circuit when in ON state. These diagnostics can be available as grouped for all

four channels or channel specific via an SPI interface on some product options. Status LEDs can be connected to the Si834x

which indicate the true status of the output (ON/OFF or fault condition). Daisy chain capability for a total of 128 channels (32x

Si834x) is also possible with the SPI option. The Si834x offers longer service life and dramatically higher reliability compared

to other solutions.

Silicon Labs

Si834xSi83404AAA-IFSi83414AAA-IFSi83424DAA-IFSi83408A0A-IFSi83418A0A-IFSi83428D0A-IFSi83408AAA-IFSi83418AAA-IFSi83428DAA-IFSi83404AAA-ISSi83414AAA-ISSi834x-IFSi834x-ISSi83404xAx-IFSi83424xAx-IFSi83414xAx-IFSi83408x0x-IFSi83428x0x-IFSi83418x0x-IFSi83408xAx-IFSi83428xAx-IFSi83418xAx-IFSi83404x-ISSi83414x-IS

More

Part#

Quad PLC Output Driver

More

Programmable logic controllers ]Industrial data acquisition ]Distributed control systems ]CNC machines ]I/O modules ]Motion control systems – Servo motors ]

More

Datasheet

More

CQC(GB4943.1-2011) 、 CSA(IEC 60950-1, 61010-1, 60601-1) 、 ESD(CDM,500V) 、 ESD(HBM,4000V) 、 ESD(MM,200V) 、 IEC 61131-2 、 RoHS 、 UL 1577 、 VDE(IEC 60747-5-2)

More

Please see the document for details

More

More

DFN-32;TSOP-24

English Chinese Chinese and English Japanese

Rev 0.4

2.3 MB

- The full preview is over. If you want to read the whole 18 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: