Constant Voltage - AC Regulator (+/- 120VAC to 120VAC) (CV Series) - Hammond Mfg. Quality Products. Service Excellence. Constant Voltage - AC Regulator (+/- 120VAC to 120VAC) CV Series Plug-In
●Features
■AC regulating - protects against both brownouts & over voltage conditions.
■Protects against any power problem other than a blackout.
■Will operate through a 3 millisecond (minimum) blackout.
■Long life - ferroresonant design - no moving parts.
■Ferroresonant design also filters out surges, line harmonics, and RF noise.
■Input 120VAC (+10 % to -25 %), 60 Hz
■Output 120VAC (+/- 3 %).
■Provides circuit isolation.
■Noise Isolation (RF) of 120 db common mode, 60 db normal mode.
■Spike attenuation: 250:1 minimum.
■Sine wave output - total harmonic distortion (THD): 3 %
■Units also include a 2nd stage of high frequency filtering on the output - a Hammond Mfg. exclusive.
■Operating temperature range of -40 degrees C to +40 degrees C.
■Standard 3-wire, grounded plug & receptacle.
■Front panel lighted power switch.
■Input (primary) connected to an extra long 15 foot, heavy duty 14/3 SJTW cord for extreme temperature ranges.
■Integral molded, standard North American plug (NEMA 5-15P).
■Output (secondary) connected to a rear mounted, standard North American, grounded receptacle (NEMA 5-15R) - quantity depends on power capacity of unit (see table below).
■Rugged two piece ventilated steel enclosure.
■Finished in a grey/beige color, textured powder paint with rubber feet installed.
■NOTE 1: Due to the nature of ferroresonant designs - these units do produce audible noise. We have reduced this through careful design, but these units are NOT usable in an office environment.
■NOTE 2: These units provide complete isolation from the source voltage. In other words, the "neutral" output wire has no connection to ground, this is a UL requirement for this type of device. Therefore plug-in circuit testers & line "polarity" testing devices will NOT function on the output as it is completely isolated.
■North American Mark of Safety: C UL & UL listed (File #E211544).
■Indoor use only.
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
6/17/2018 |
|
|
|
|
|
|
|
|
209 KB |
- +1 Like
- Add to Favorites
Recommend
- Keysight‘s Take on CVE-2022-30190 MSDT Follina Exploit
- Chroma 62000d Programmable Bidirectional Dc Power Supplies Have Both Power Source and Load Characteristics
- Kinetic Technologies Announces Next Generation 5W Wireless Power Receiver with Integrated Battery Charger for Space Constrained Applications
- Lithium-Ion Cell Charging and Discharging During Life Cycle Testing Versus Formation
- 8610 Battery Pack Integrated Testbed for Testing New Energy Vehicle Battery Systems and Subparts | Chroma
- The lithium battery protection IC HKT4056E Produced by Hottech can be Used for a Single Lithium ion Battery
- Unlocking the Power of LEDs: A Comprehensive Guide to the LED Power Series
- O2Micro Provides Intelligent Battery products including BMU, AFE, PMIC and DFE for Home Applications
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
