ISL8487, ISL81483, ISL81487 1/8 Unit Load, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers DATASHEET

2019-05-25
These Intersil RS-485/RS-422 devices are “fractional” unit load (UL), BiCMOS, 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Unlikecompetitive devices, this Intersil family is specified for 10% tolerance supplies (4.5V to 5.5V).
The ISL81483 and ISL81487 present a 1/8 unit load to the RS-485 bus, which allows up to 256 transceivers on the network for large node count systems (e.g., process automation, remote meter reading systems). The 1/4 UL ISL8487 allows up to 128 transceivers on the bus. In a remote utility meter reading system, individual (apartments for example) utility meterreadings are routed to a concentrator via an RS-485 network, so the high allowed node count minimizes the number of repeaters required to network all the meters. Data for all meters is then read out from the concentrator via a single access port, or a wireless link.
Slew rate limited drivers on the ISL8487 and ISL81483 reduce EMI, and minimize reflections from improperly terminated transmission lines, or unterminated stubs in multidrop and multipoint applications. Data rates up to 250kbps are achievable with these devices.
Data rates up to 5Mbps areachievable by using the ISL81487, which features higher slew rates.
Receiver (Rx) inputs feature a “fail-safe if open” design, which ensures a logic high Rx output if Rx inputs are floating.
Driver (Tx) outputs are short circuit protected, even for voltages exceeding the power supply voltage. Additionally, on-chip thermal shutdown circuitry disables the Tx outputs to prevent damage if power dissipation becomes excessive.
These half duplex devices multiplex the Rx inputs and Tx outputs to allow transceivers with Rx and Tx disable functions in 8 lead packages.

Renesas

ISL8487ISL81483ISL81487ISL8487IBZISL8487EIBZISL8487IPZISL8487EIPZISL81483IBZISL81483IPZISL81487IBZ

More

Part#

1/8 Unit Load, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers

More

High Node Count Networks ]Automated Utility Meter Reading Systems ]Factory Automation ]Security Networks ]Building Environmental Control Systems ]Industrial/Process Control Networks ]

More

Datasheet

More

ESD 、 ESD(HBM,>7kV) 、 IPC/JEDEC J STD-020 、 ISO9001 、 MIL-STD-883 、 Pb-Free 、 RoHS

More

Please see the document for details

More

More

8 Ld SOIC;8 Ld PDIP

English Chinese Chinese and English Japanese

March 14, 2016

Rev 8.00

FN6050

1.2 MB

- The full preview is over. If you want to read the whole 14 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: