ST16C550 UART WITH 16-BYTE FIFO'S

2022-07-29

The ST16C550 (550) is a universal asynchronous receiver and transmitter with 16 byte transmit and receive FIFO. It operates at 2.97 to 5.5 volts. A programmable baud rate generator can select transmit and receive clock rates from 50 bps to 1.5 Mbps.
The ST16C550 is an improved version of the NS16C550UART with higher operating speed and lower access time. The ST16C550 on board status registers provides the error conditions, type and status of the transfer operation being performed. Included is complete MO-DEM control capability, and a processor interrupt system that may be software tailored to the user’s requirements. The ST16C550 provides internal loop-back capability for on board diagnostic testing.
The ST16C550 is available in 40 pin PDIP, 44 pin PLCC,and 48 pin TQFP packages. It is fabricated in an advanced CMOS process to achieve low drain power and high speed requirements.
●FEATURES
■Pin to pin and functionally compatible to the Industry Standard 16C550
■2.97 to 5.5 volt operation
■24MHz clock operation at 5V
■16MHz clock operation at 3.3V
■16 byte transmit FIFO
■16 byte receive FIFO with error flags
■Full duplex operation
■Transmit and receive control
■Four selectable receive FIFO interrupt trigger levels
■Standard modem interface
■Compatible with ST16C450
■Low operating current ( 1.2mA typ.)

EXAR

ST16C550ST16C550CP40ST16C550CJ44ST16C550CQ48ST16C550IP40ST16C550IJ44ST16C550IQ48

More

Part#

UART

More

More

Datasheet

More

More

Please see the document for details

More

More

40-Lead PDIP;44-Lead PLCC;48-Lead TQFP

English Chinese Chinese and English Japanese

April 2005

Rev. 5.01

907 KB

- The full preview is over. If you want to read the whole 35 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: