ISL32613E, ISL32614E ±16.5kV ESD Protected, +125°C, 1.8V to 3.6V, Low Power, SOT-23, RS-485/RS-422 Transmitters DATASHEET
The ISL32613E and ISL32614E are ±16.5kV HBM ESD
protected (7kV IEC61000 contact), 1.8V powered, single
transmitters for differential communication. These drivers
have very low bus currents (±40µA), so they present less than
a 1/8 unit load to the bus. This allows more than
256 transmitters on the network, without violating the RS-485
specification’s 32 unit load maximum and without using
repeaters.
Hot plug circuitry ensures that the Tx outputs remain in a high
impedance state while the power supply stabilizes.
Both ICs use slew rate limited drivers, which reduce EMI and
minimize reflections from improperly terminated transmission
lines or unterminated stubs in multidrop and multipoint
applications. The ISL32613E is more slew rate limited for data
rates up to 128kbps, while the less limited ISL32614E is
useful for data rates up to 256kbps.
For companion low power single RS-485 receivers, refer to the
ISL32610E datasheet.
ISL32613E 、 ISL32614E 、 ISL32613EFHZ-T 、 ISL32613EFHZ-T7A 、 ISL32614EFHZ-T 、 ISL32614EFHZ-T7A |
|
±16.5kV ESD Protected, +125°C, 1.8V to 3.6V, Low Power, SOT-23, RS-485/RS-422 Transmitters |
|
[ Industrial/process control networks ][ Space-constrained systems ][ Factory automation ][ Building environmental control ][ lighting systems ] |
|
Datasheet |
|
ESD 、 IPC/ JEDEC J STD-020 、 Pb-free 、 RoHS |
|
Please see the document for details |
|
|
|
|
|
6 Ld SOT-23 |
|
English Chinese Chinese and English Japanese |
|
Jun 12, 2018 |
|
Rev 3.00 |
|
FN7906 |
|
1 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.