TSE2004GB2C0 DDR4 Temperature Sensor with Integrated 4Kbit EEPROM for Memory Module

2020-06-24
The TSE2004GB2C0 digital temperature sensor comes with several user-programmable registers to provide maximum flexibility for temperature-sensing applications. The user-programmable registers specify critical, upper and lower temperature limits as well as hysteresis settings. Both the limits and hysteresis values are used for communicating temperature events from the chip to the system. This communication is done using the EVENT_n pin, which has an open-drain configuration. The user has the option of setting the EVENT_n pin polarity as either an active-low or active-high comparator output for thermostat operation, or as a temperature event interrupt output for microprocessor-based systems. The sensor in the TSE2004GB2C0 uses an industry-standard two-wire, I2C/SMBus serial interface, and allows up to eight devices to be controlled on the bus. The 4Kbit (512 bytes) serial EEPROM memory in the part is organized as two pages of 256 bytes each, or 512 bytes of total memory. Each page is comprised of two 128 byte blocks. The devices are able to selectively lock the data in any or all of the four 128-byte blocks.

IDT

TSE2004GB2C0TSE2004GB2C0NCGTSE2004GB2C0NCG8

More

Part#

DDR4 Temperature Sensor with Integrated 4Kbit EEPROM for Memory Module

More

DIMM modules (DDR3, DDR4) ]Servers, laptops, ultra-portables, PCs, etc. ]Industrial temperature monitors ]Hard disk drives and other PC peripherals ]

More

Datasheet

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

October 23, 2017

1.5 MB

- The full preview is over. If you want to read the whole 34 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: