marcTX, marcSP, marcLV Marconi wireless DMX system technical data sheet

PublishTime：2024-11-30

●The Marconi wireless system from Doug Fleenor Design allows DMX512 distribution where cabling is not practical. Doug Fleenor believes cable is m ore reliable than wireless, but recognizes the advantages of wireless system s such as quicker setup, building top to building top (or cross river) com m unications, fewer wires to tape down, as a backup to a cable link, for troubleshooting, for focusing before the FOH cables are installed, and so on.
●Doug Fleenor has been looking for a wireless solution for his clients for years and has decided the W -DMX system from W ireless Solution of Sweden m eets his criteria. Marconi wireless com ponents use W ireless Solution technology m ated with Doug Fleenor Design interface com ponents to form a reliable wireless system with great custom er support.
●Marconi com ponents are 100% com patible with W -DMX products from W ireless Solution as well as from other W -DMX partners.
●The Marconi transm itter (Marconi TX) sends 512 DMX channels (one universe) wirelessly to any num ber of W -DMX receivers. Up to 16 transm itters can be used in a single venue for at total of 8,192 DMX channels.
●The Marconi TX can be table top or truss m ounted (with a C-clam p or half coupler). A 2 dB rubber whip antenna is standard. Gain antennas are available to increase transm ission range. The attached power supply operates from 100 to 240 volts AC.
●The Marconi splitter (Marconi SP) receives all 512 channels (one universe) of DMX wirelessly through the W -DMX technology and provides three isolated DMX512 outputs. Outputs are isolated from each other using 2500 volt optical couplers and 600 volt DC/DC converters.
●Indicators include POW ER, ASSIGNED (lights when the unit is assigned to a transm itter), RF LINK (lights when the assigned transm itter is on and within range), and DMX512 (lights when DMX512 is available at the outputs) . A 2 dB rubber whip antenna is standard. Gain antennas are available to increase reception range. The attached power supply operates from 100 to 240 volts AC.
●The Marconi "low voltage" (Marconi LV) is identical in perform ance to the Marconi SP but is powered by low voltage instead of line voltage and has only one DMX512 output. The LV is designed to m ount to our LED300 power supply but can be used with any 24V system that provides power on pins 1 and 4 of a four pin XLR (color scroller for exam ple). The LV m ay also be powered by an optional external supply.

Brand of Product：	Doug Fleenor Design
Part#：	marcTX 、 marcSP 、 marcLV More Part#
Product Category：	Marconi wireless DMX system 、 Marconi wireless system More
Application：	More
Data Type：	Datasheet More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：
Language：	English Chinese Chinese and English Japanese
Date of Creation：	2008/7/16
Version Number：
Data Encoding：
Data Size：	901 KB

Data section preview(1pages)

- The full preview is over,the data is 1 pages -

Download

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits