2322DMX RS-232 to DMX Interface technical data sheet

PublishTime：2024-11-30

●The RS-232 to DMX interface allows advanced A/V control systems and computers to operate standard DMX512 devices such as dimmers and moving lights. It can also be used to allow an RS-232 based control system to receive DMX512 data. The RS-232 protocol used for this communication is made up of simple ASCII strings sent or received at 9600 baud. The interface can set and fade DMX channels to specific levels. It can also record and play 20 presets, each with individual fade times. The interface can be used to capture incoming levels produced by an outside DMX source. Other commands available include support for remote preset selection panels (using our Preset 10), monitoring of DMX channel levels, selection of DMX input or output modes, and downloading of new software. All options and presets are held in the non-volatile memory.
●The DMX port is fully opto-isolated to avoid ground loop problems and to help protect equipment. The RS-232 port appears on the front panel as a standard DB-9 connector. Another RS-232 port is available on the rear panel through a 3 pin female XLR connector. Only one of these connections can be used at a time. For simple operation, the Windows Hyperterminal program can be used to communicate with the interface. The RS232 to DMX interface is backed by our standard 5 year warranty.

Brand of Product：	Doug Fleenor Design
Part#：	2322DMX More Part#
Product Category：	RS-232 to DMX Interface More
Application：	More
Data Type：	Datasheet More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：
Language：	English Chinese Chinese and English Japanese
Date of Creation：	2019/7/19
Version Number：
Data Encoding：
Data Size：	152 KB

Data section preview(2pages)

- The full preview is over,the data is 2 pages -

Download

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits