FSP1000-50ADB Meet 80 PLUS Gold, RoHS Compliant 1000 Watts ATX Switching Power Supply

2024-11-22
●Features
■Full modular cable management.
■Active Power Factor Correction (PFC) meet EN61000-3-2
■High efficiency and reliability
■Compatible with European Union Directive 2011/65/EU & (EU)2015/863 (Restriction on Hazardous Substances).
■Remote ON/OFF function
■Internal 12V DC fan included
■With AC input I/O switch.
■Low noise and ripple
■Output over voltage, short circuit, and over current protection
■100% Hi-pot, ATE, and burn-in tested
■Re-settable power shut down
■Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
■Approved by CB 62368 & 60950-1 2 nd , EMC. UL TUV, FCC.
●Specification
■Temperature Range:
▲Operating: 0°C ~ +50°C
▲Storage & shipping: -20°C ~ +80°C
■Humidity:
▲operating: 10~90% RH, Non-condensing,
▲Storage: 95% RH, Non-condensing,
■Dielectric Withstand: Primary frame ground 1800V AC for 2 second
■Efficiency: Typical > 90%
■Altitude: Operation Altitude : 5000 meters above sea level.
■Standby Power consumption (5Vsb)
■Rise time: Less than 20ms
■Hold-up Time: 17 ms minimum at 80% full load.
■Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
■Leakage Current: Less than 3.5mA at 264Vac, 63Hz
■MTBF:A minimum predicted MTBF (MIL-HDBK-217) of 100,000 hours of continuous operation at +25°C.
■Dimensions (LxWxH): 190x150x86mm / 7.49x5.91x3.4inch

FSP

FSP1000-50ADB

More

Part#

1000 Watts ATX Switching Power Supply

More

More

Datasheet

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

2019/3/12

110 KB

- The full preview is over,the data is 1 pages -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: