FSP10 FLOW SWITCH FOR DIRECT SWITCHING OF PUMP

PublishTime：2021-10-14

●The FSP10 is designed for directly controlling an electric pump that is providing increased pressure or flow within water systems that are gravity fed from storage tanks. The device has to be fitted in the pipe above the pump.
●The FSP10 starts up the pump when the flow rate through the device exceeds 0.6 l/min, so giving an increased flow and pressure, dependent on the pump capacity.
●A flow of less than 0.6 l/min, or 3.0 l/min depending on version, whether due to a lack of supply (e.g. tank empty) or to a decrease in demand (e.g. tap closing), will turn the pump off again.
●Features
■Direct switching of pumps up to 4A inductive
■0.6 l/min or 3.0 l/min turn on flow rate
■Automatic shut down on flow stop
■Supply and pump electrical connections terminated within case with cable glands at entry
■1”BSP pipe connections

Brand of Product：	CYNERGY3
Part#：	FSP10 、 FSP10A06 、 FSP10A30 More Part#
Product Category：	FLOW SWITCH FOR DIRECT SWITCHING OF PUMP 、 FLOW SWITCH More
Application：	[ DIRECT SWITCHING OF PUMP ][ control electric pump ] More
Data Type：	Datasheet More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：
Language：	English Chinese Chinese and English Japanese
Date of Creation：	03/09/21
Version Number：	Rev: Cynergy3-fsp10-v3
Data Encoding：
Data Size：	473 KB

Data section preview(2pages)

- The full preview is over. If you want to read the whole 3 page document,please Sign in/Register -

Download

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits