PMC-24V150W2AA 使用说明书 (PMC-24V150W2AA Instruction Manual)
■與通風表面保持至少 20mm 的安全距離，以確保對流冷卻充分。
■本產品不適合擺放在低熱導體，例如: 塑膠。
■受環境溫度及產品負載的影響，本機外殼溫度會很高，因此在上電時或切斷電源後短時間內不要觸摸本機，以免燙傷。
■請勿在上電時觸摸連接端子，以防電擊危險。
■安裝過程中，應避免金屬元件或金屬導體通過空隙或通風孔進入到產品內，否則會引起下列狀況。
▲電擊;安全危害;火災;產品異常
■警告: 在連接產品電源供應時，產品必須先接地然後才接 L 和 N。當要解開電源供應時，必須先把 L 和 N 解開然後才把接地解開。
●Safety Instructions
■To ensure sufficient convection cooling, always maintain a safety distance of ≥ 20mm from all ventilated surfaces while the device is in operation.
■The device is not recommended to be placed on low thermal conductive surface, for example, plastics.
■Note that the enclosure of the device can become very hot depending on the ambient temperature and load of the power supply. Do not touch the device while it is in operation or immediately after power is turned OFF. Risk of burning!
■Do not touch the terminals while power is being supplied. Risk of electric shock.
■Prevent any foreign metal, particles or conductors to enter the device through the openings during installation. It can cause:
▲Electric shock; Safety Hazard; Fire; Product failure
■Warning: When connecting the device, secure Earth connection before connecting L and N. When disconnecting the device, remove L and N connections before removing the Earth connection.
|
|
|
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2019/4/25 |
|
|
REV.01 |
|
|
|
|
|
703 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
