PMC-24V035W1A□ 使用说明书 (PMC-24V035W1A□ Instruction Manual)
■与通风表面保持至少 20mm 的安全距离，以确保对流冷却充分。
■本产品不适合摆放在低热导体，例如: 塑胶。
■受环境温度及产品负载的影响，本机外壳温度会很高，因此在上电时或切断电源后短时间内不要触摸本机，以免烫伤。
■请勿在上电时触摸连接端子，以防电击危险。
■安装过程中，应避免金属元件或金属导体通过空隙或通风孔进入到产品内，否则会引起下列状况。
▲电击;安全危害;火灾;产品异常
■警告: 在连接产品电源供应时，产品必须先接地然后才接 L 和 N。当要解开电源供应时，必须先把 L 和 N 解开然后才把接地解开。
●Safety Instructions
■To ensure sufficient convection cooling, always maintain a safety distance of ≥ 20mm from all ventilated surfaces while the device is in operation.
■The device is not recommended to be placed on low thermal conductive surface, for example, plastics.
■Note that the enclosure of the device can become very hot depending on the ambient temperature and load of the power supply. Do not touch the device while it is in operation or immediately after power is turned OFF. Risk of burning!
■Do not touch the terminals while power is being supplied. Risk of electric shock.
■Prevent any foreign metal, particles or conductors to enter the device through the openings during installation. It can cause:
▲Electric shock; Safety Hazard; Fire; Product failure
■Warning: When connecting the device, secure Earth connection before connecting L and N. When disconnecting the device, remove L and N connections before removing the Earth connection.
|
PMC-24V035W1A□ 、 PMC-24V035W1AA 、 PMC-24V035W1AJ 、 PMC-24V035W1AL |
|
|
|
|
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2020/3/11 |
|
|
REV.03 |
|
|
|
|
|
763 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
