M0600 Shutdown Unit
●The unit has inputs for overspeed, low oil pressure and one more user defined parameter, which could be high water temperature or another user defined parameter.
●It also has an input to indicate that the engine is running and one to indicate that the engine is stopping.
●The monitoring of low oil pressure is only active when the engine is running with a few seconds delay after detection of the running signal. This time delay can be defined via programming switches.
●A normally open (NO) output relay can give a closing signal which can be used to stop the engine via it’s stop coil, and a normally closed (NC) relay can open in order to stop the engine via the fuel valve. The length of the relay activation time can be defined via programming switches.
●The unit works as a stand-alone protection unit, and is for DIN-rail mounting. Alternatively it can be mounted directly on the back of the SELCO M2000 Engine Controller.
●The SELCO M0600 Shutdown Unit provides protection for any type of diesel or gas engines.
●The SELCO M2000 Engine Controller is an advanced engine controller with many features.
●In some situations an extra back-up protection device is wanted for safety reasons, in addition to the protection provided by the M2000, and in such situations an ideal combination is the M2000 with the M0600 Shutdown Unit mounted on the back.
●In normal situations the M2000 will take care of the protection. However, if for some reason the M2000 fails to shut down the engine the M0600 will take care of the shutdown function.
●Two different power supplies can be used for the two units, providing an extra safety function.
●The M0600 Shutdown Unit also provides space for containing the SELCO M0700-50 Universal PC Board. The M0700-50 is for use with the SELCO M1000 Alarm Annunciator, the SELCO M2000 Engine Controller and the SELCO M2100 Emergency Controller.
●The M0700-50 is a stand-alone as well as an auxiliary printed circuit board for easy soldering of resistors, diodes or other circuitry to be used on both inputs and outputs on the above mentioned units.
●The board includes a number of resistors of 3.3 KW, which can be used on the inputs of the M2000 Engine Controller and the M2100 Emergency Controller to form a pre-warning input through a normally closed contact (see separate description of the controllers).
|
[ diesel engines ][ gas engines ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2006/6/21 |
|
|
|
|
|
|
|
|
347 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
