MRI32R 3.4 Current Monitoring
■Nominal voltage
▲12 ... 48 V AC / DC
▲110 ... 240 V AC / DC
■Operating voltage range
▲10 ... 60 V
▲85 ... 250 V
■Power consumption AC / DC
▲3.2 VA / 1.6 W
▲2.6 VA / 1.5 W
■Rated frequency
▲16 ... 63 Hz
▲16 ... 63 Hz
●Measuring circuit
■Measured parameters: I, f
■Min. setting step, resolution: 0.1 A / 1 Hz
■Monitoring functions: Under, over, inside, outside
■Number of voltage measurement inputs: 3
■Rated measurement current: 5 A
■Measurement current range: 0.1 ... 5 A
■Undercurrent setting range: 0.1 ... 6 A
■Overcurrent setting range: 0.1 ... 6 A
■Rated base frequency: 15 ... 150 Hz
■Alarm delay: 0.5 ... 999.9 s
■Alarm reset delay: 0.5 ... 999.9 s
●Main circuit
■Number of contacts: 2 CO
■Available contact materials: AgNi
■Rated voltage: 250 V AC
■Rated current: 6 A
■Minimum load: 10 mA, 10 V
■Inrush current: 10 A, 10 ms
■Rated load DC: fig. 2
■Rated load AC-1: 1,250 VA
■Mechanical endurance (cycles): 30 000 000
■Electrical endurance at rated load AC-1 (cycles): fig. 3
●Insulation
■Rated test voltage measuring / measuring circuit: 1.5 kV rms / 1 min
■Rated test voltage measuring circuit / power supply: 2 kV rms / 1 min
■Rated test voltage measuring circuit / main circuit: 2 kV rms / 1 min
■Rated test voltage main circuit / power supply :2 kV rms / 1 min
■Rated test voltage main / main circuit: 1.5 kV rms / 1 min
■Rated test voltage open contact: 1.5 kV rms / 1 min
■Pollution degree: 2
■Overvoltage category: III
●General data
■Ambient temperature storage (no ice): -40 ... 85 °C
■Ambient temperature operation: -40 ... 60 °C
■Conductor cross section: 2.5 mm²
■Nominal screw torque: 0.6 Nm
■Dimension: fig. 4
■Weight: 125 g
■Protection degree: IP 20
■Housing material: PC
|
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2022/2/15 |
|
|
|
|
|
945 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.