TP4056 (1A Standalone Linear Li-Ion Battery Charger) Datasheet
■The TP4056 is a complete constant-current/constant-voltage linear charger for single cell lithium-ion batteries. It’s ESOP8/EMSOP8 package and low external component count make the TP4056 ideally suited for portable applications. The TP4056 is designed to work within USB power specifications (wall adaptor or USB supply).
■No external sense resistor or blocking diode is required due to it’s internal PMOSFET architecture and integrated reverse discharge protection. TP4056 limits the charge current based on die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a resistor. TP4056 automatically terminates the charge cycle when the charge current drops to 1/10th of the programmed value after reaching the final float voltage.
■When input power supply is removed, TP4056 will enter a low current state with battery drain current less than 2μA. TP4056 can also enter a shut-down mode with power supply, lowering supply current to less than 55μA.
■Other features include cell temperature monitor, under voltage lockout, automatic recharge and two LED status indication pins for charge termination and presence of an input voltage.
●FEATURES
■Programmable Charge Current Up to 1000mA
■No MOSFET, Sense Resistor or Blocking Diode Required
■Complete single-cell linear Li-Ion battery charger in ESOP8/EMSOP8 Package
■Constant-Current/Constant-Voltage operation with thermal regulation
■Preset 4.2V Charge Voltage with 1% Accuracy
■Automatic Recharge
■Automatic End-of-charge control
■UVLO
■Two Charge Status Output Pins
■C/10 Charge Termination
■55μA Charge Current in Standby Mode
■2.9V Trickle Charge Threshold
■Soft-Start Limits Inrush Current
■8-Lead ESOP /EMSOP Package
Standalone Linear Li-Ion Battery Charger 、 complete constant-current/constant-voltage linear charger |
|
[ single cell lithium-ion batteries ][ portable applications ][ Cellular Telephones ][ PDAs ][ GPS ][ Charging Docks ][ Digital Cameras ][ Portable Devices ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
ESOP;EMSOP;ESOP8;EMSOP8 |
|
English Chinese Chinese and English Japanese |
|
2024/9/2 |
|
REV_2.4 |
|
|
|
1.3 MB |
- +1 Like
- Add to Favorites
Recommend
- TOP POWER ASIC Introduces TP4065 Linear Li-lon Battery Charger with Charge Current Ranging From 3mA to 600mA
- TP4067 3mA-600mA Linear Li-lon Battery Charger from TOP POWER ASIC Features Preset Charge Voltage with 1% Accuracy
- TOP POWER ASIC Releases Linear Li-lon Battery Charger TP4057 with Highest Input up to 9V and Programmable Charging Current up to 500mA
- XBLW TP4056-Based Rechargeable Flashlight Solution with a Voltage Ranging from 2.6V to 4.2V
- HXY MOSFET Innovates One Stop Power Device Solution for Neck Massage Devices
- Discover the Top Choice for a Fully Modular Power Supply
- Top Pick: The Best Fully Modular Power Supply for Maximum Versatility
- Top Pick: 750W Modular Power Supply for Optimal Performance, Efficiency and Flexibility
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.