Tputty™ 508 Application Notes
■Recommended Use: Tputty™ 508 is a single part dispensable material designed with automation and vertical stability in mind. Laird has leveraged its knowledge of thermally conductive fillers and resin systems to develop a single part dispensable that demonstrates reliability in a variety of application orientations.
■Tputty™ 508 is ideal for applications that can benefit from automation and allows minimization of SKUs in applications with gap variability. In addition to providing application flexibility and variable gap adaptation, Tputty™ 508 will exert minimum stress on your component while maintaining interface contact to maximize thermal transfer.
●Preparation and Clean-up
■Preparation for Use: Tputty™ 508 is a one part material and is ready to use out of the container. Make sure surfaces to be covered are clean and dry. Mixing of Tputty™ 508 before use is not recommended; however, the flow rate may be lower than specified on the datasheet if dispensed at temperatures below 23℃.
■Clean-up: Excess material can be cleaned up using a dry rag. Residual silicone oil can be removed using a clean rag and acetone solvent.
■Exposure to solvents: Tputty™ 508 is a silicone material filled with thermally conductive fillers. Exposure to organic solvents and strong bases can result in swelling or removal of the silicone carrier material resulting in degradation or loss of performance.
|
single part dispensable material 、 one part material 、 silicone material |
|
|
|
|
|
Application note & Design Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
5/6/2024 |
|
|
Rev D |
|
|
A17246-00 |
|
|
538 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
