OR-6N137 Photo coupler Product Data Sheet
■6N137 is made up of an efficient AlGaAs light-emitting diode and high-speed optical detector. This design provides good ac and dc isolation between the input and output ends of the photoelectric coupler. The output characteristic of the photodetector is a collector open circuit schottky clamp transistor. The total mode transient immunity should reach 10 kv/pa at 3.3 v.
■The photoelectric couple operating temperature range: - 40 ℃ ~ + 110 ℃.
●Features
■3.3v / 5V supply voltage
■Low power consumption
■High speed: 15MBd(typical)
■VCM=1000V, and the lowest common mode inhibition (CMR) is 10 kv/μs.
■- 40 ℃ ~ + 110 ℃ temperature of AC and DC performance.
■Safety approval
◆UL approved (No.E323844)
◆VDE approved (No.40029733)
◆CQC approved (No.CQC19001231254 )
■In compliance with RoHS, REACH standards
■MSL Class Ⅰ
OR-6N137 、 6N137 、 OR-6N137Y-Z 、 OR-6N137M 、 OR-6N137S 、 OR-6N137S-TA 、 OR-6N137S-TA1 |
|
[ line receiver isolation ][ A/D converted digital signal isolation ][ D/A converted digital signal isolation ][ eliminate noise from the ground loop ][ switching power supply ][ alternative pulse transformers ][ motor control system ][ interface ][ microprocessor system ][ computer equipment ][ peripheral equipment ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
DIP-8;SOP-8;DIP;SOP |
|
English Chinese Chinese and English Japanese |
|
2024/6/26 |
|
V8 |
|
|
|
1.5 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.