APM32F072xBT7 Arm® Cortex®-M0+ based 32-bit MCU Datasheet
■Core
▲32-bit Arm® Cortex®-M0+Core
▲Up to 48MHz working frequency
■On-Chip Memory
▲Flash：128KB
▲SRAM：16KB
■Clock
▲External 4~32MHz Crystal oscillator
▲32.768KHz oscillator with calibration
▲Internal 8MHz RC oscillator
▲Internal 48MHz self-correcting RC oscillator
▲Internal 40KHz RC oscillator
▲PLL supports 2~16 frequency doubling
■Reset, Power Management
▲Power-on/ Power-down reset (POR/PDR)
▲Programmable voltage regulator
▲Digital supply voltage: VDD=2.0~3.6V
▲Analog supply voltage: VDDA=VDD~3.6V
▲Partial I/O supply voltage: VDDIO2=1.65~3.6V
▲Support external battery VBAT to supply power to RTC and backup register: VBAT=1.65~3.6V
■Low Power Consumption Mode
▲Sleep, stop and standby mode
■Serial Wire Debugging (SWD)
■I/O
▲Up to 51 I/Os
▲All I/Os are mappable to external interrupt vectors
▲Up to 32 I/Os with 5V input tolerance， 16 I/Os are powered by VDDIO2
■Communication Interface
▲Two I2C interfaces (1Mbit/s), all of which support SMBus/PMBus and wake-up
▲Four USART interfaces, all of which support master synchronous SPI and modem control, and two of them support ISO7816, LIN and IrDA interfaces, automatic baud rate detection and wake-up
▲Two SPI interfaces (18Mbit/s), all supporting I2S interface multiplexing
▲One CAN interface
▲One full-speed USB2.0 interface, without external crystal oscillator, supporting BCD and LPM
▲HDMI CEC
■Analog Peripherals
▲One 12-bit ADC, supporting up to 16 external channels, with conversion range of 0~3.6V, independent analog power supply: VDDA=2.4~3.6V
▲One dual, 12-bit DAC
▲Two programmable analog comparators
▲Up to 18 capacitive sensing channels, which can be used for proximity, touch key, linear or rotary sensors
■Timer
▲One 16-bit advanced control timer TMR1,which can provide 7 channels of PWM output, and supports dead zone generation and brake input functions
▲One 32-bit and five 16-bit general timers, each timer has up to four independent channels for input capture/output comparison
▲Two 16-bit basic timers
▲One independent watchdog and one system window watchdog timer
▲One system tick timer
■RTC
▲Support calendar function
▲Alarm and regular wake-up from stop/standby mode
■7-Channel DMA Controller
■CRC Calculation Unit
■96-Bit UID
|
APM32F072xBT7 、 APM32F072 、 APM32F072xBT7 Series 、 APM32F072RBT7 、 APM32F072CBT7 、 APM32F072xBT7XXX 、 APM32F072RBT7-R 、 APM32F072CBT7-R |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
LQFP48;LQFP64;LQFP |
|
|
English Chinese Chinese and English Japanese |
|
|
2023.2 |
|
|
V1.0 |
|
|
|
|
|
5.3 MB |
- +1 Like
- Add to Favorites
Recommend
- Geehy Newly Launched APM32F072xB Series Industrial-grade Extended MCU with an Operating Frequency of 48MHz
- PEmicro Fully Supports Geehy APM32 Series MCUs
- Geehy and SEGGER Partner to Fully Support the APM32 Series industrial ＆ automotive-grade MCUs
- Geehy Launches High Performance ＆ High Security APM32F405/415 Series Industrial-grade MCUs
- Geehy Showcased a Reliable 32-Bit APM32 MCU Solution at Embedded World 2023
- Geehy APM32F003F6U7 MCU Receives AEC-Q100 Certification
- RT-Thread Studio Supports Geehy APM32F1 Series Industrial/Automotive-grade MCUs
- Geehy Attended the 17th Household Appliance Power Supply ＆ Intelligent Control Technology Seminar with Industrial-grade General-purpose MCUs
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
