Paladin™ Advanced Mode Locked UV Laser System Preinstallation Manual
●The Paladin Advanced Laser system has been designed to provide protection to the operator in the event of any single component failure, provided that the system is installed and operated properly as described in the Operator’s manual. All laser users must read, understand, and follow the safety warnings and operating instructions contained within the operator’s manual.
●Because the manufacturer is unable to guarantee the safety of laser users in the event of two independent component failures, this equipment must not be operated if there is evidence of any personnel hazard, component failure, improper installation, or significant damage. The failure of a single component is not hazardous, but may allow for no protection against, or warning of, a hazardous condition if another failure occurs. Routinely inspect the laser system for evidence of potential safety hazards or component failures.
●If it is suspected that the laser system is missing safety related parts, has been damaged, or may otherwise be unsafe, turn the laser off, disconnect the input power immediately, and contact your local Coherent service representative. Do not operate the laser until all potential safety hazards have been eliminated. Do not remove any housings or protective covers unless directed to do so by a certified Coherent service representative.
Paladin Advanced Laser system 、 laser 、 diode-pumped solid-state mode-locked laser 、 Paladin Advanced Pump Module Assembly 、 Laser Head Cable 、 Laser system |
|
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
1/2015 |
|
Rev. AD |
|
1211163 |
|
9.5 MB |
- +1 Like
- Add to Favorites
Recommend
- Coherent Showcased Award-Winning 100G and 400G Coherent Transceivers at OFC 2023
- Coherent Demonstrated Next-generation Transceiver Technology for Digital Coherent Optics in Ultracompact Pluggable form Factors for Disaggregated Systems at ECOC 2023
- Coherent Introduces Wavemaker® and Waveshaper® Optical Solutions For Multi-Wavelength Transmissions
- Coherent Introduces I-Temp Micro-Pump Lasers for Extended Temperature Operation in Broadband Optical Access Networks
- COHERENT ISSUES ITS ESG REPORT 2023 AND SETS A NET ZERO GREENHOUSE GAS EMISSIONS TARGET OF FY2040
- Coherent Introduces 30 kW Laser Cutting Heads, Enabling Faster Cutting of Thick Sheet Metal
- Coherent Introduced 2x1000mW Dual-Chip Pump Laser Module for Optical Amplification in Optical Networks
- Coherent Introduces Diffractive Optical Elements for High-Power Industrial Lasers
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.