NSUC1610 High performance micro-controller With Integrated driver for DC , Stepper,and BLDC Motor Controlling Preliminary Datasheet
■The NSUC1610 is an ARM MCU with integrated 4 half-bridge drivers to control low-power DC motors. It can drive DC brushed motors, brush-less motors, stepper motors, etc. And It is widely used in the automotive markets .The chip conforms to the AEC-Q100 standard, and its junction temperature can support up to 175℃. Also, it is integrated with over-voltage protec-tion function, and the LIN port can support -40V~40V, BVDD pin can support -0.3~40V. The core of the chip is Cortex-M3 based on the ARM instruction set. The core adopts Harvard structure and uses independent data bus and address bus, which can improve the efficiency of getting address and data.
●Key Features
■ARM Cortex-M3 32bit core
■64KBytes Flash, 4KBytes SRAM, 512 Bytes EEPROM 32MHz high precision oscillator
■35KHz Low power and low speed clock Operating voltage 5.5V~18V
■One 12-bit high precision ADC
■Two 8-bit current-limiting DAC
■Three rapid BEMF Comparators
■One SPI communication support 3 line / 4 line One UART peripheral
■LIN PHY module support LIN2.2 communication Three 16-bit input capture module
■Two 16-bit timer
■One window watchdog
■One digital watchdog
■Four output half bridge
■Four enhanced PWM output
■A high side drive controlled by software
■One 5V output ALDO
■One 1.8V output DLDO
■Two temperature sensor
■Four working modes : active, retention, idle and sleep mode
■Sleeping power consumption is less than 50 uA with all range of temperature
■AEC - Q100 Grade 0 reliability standard
■ROHS
[ Automotive low power water pump ][ Automotive water valve ][ Automotive air conditioning pendulum ][ DC brush-less motor control ][ DC brush motor control ][ Stepper motor control ][ DC brushed motors ][ brush-less motors ][ stepper motors ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
QFN32 |
|
English Chinese Chinese and English Japanese |
|
2024/2/18 |
|
|
|
|
|
391 KB |
- +1 Like
- Add to Favorites
Recommend
- NOVOSENSE Released NSUC1610 Micro&Special Motor Driver SoC for Automotive-qualified Chips
- NOVOSENSE at Automotive World Korea 2024: Enabling Automakers to Create Smarter, Safer Vehicles
- EV100 Forum: NOVOSENSE‘s Analog Chip Technology Innovation Empowers Automotive Intelligence
- Automotive Chip Provider NOVOSENSE Has Officially Become a Member of Automotive Electronics Council
- NOVOSENSE Won VDE Premium Quality Award for High Quality Development
- NOVOSENSE Assists the Formulation of LIN Transceiver Chip Standard, Promoting the High-quality Development of the Automotive Chip Industry
- NOVOSENSE Has Launched Multiple Automobile-qualified Chips with Breakthrough Innovation Technology In the first half of 2022!
- NOVOSENSE Released a New 1200V Series SiC Diode with Typical Fowrard Voltage of 1.39V, Contributing to the SiC Ecosystem
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.