SIT1043 Low-Power CAN FD Bus Transceiver with Wake-Up and Fault Protection
■SIT1043 is an interface chip applied between CAN protocol controller and physical bus, supports 5Mbps Flexible Data-Rate, and has the capability of differential signal transmission between bus and CAN protocol controller. The SIT1043 features a CAN bus fault protection from -58V to +58V, and the receiver common mode input voltage can reach -30V to +30V, which is suitable for 12V or 24V application systems. The SIT1043 is powered by multiple power supplies and has multiple system protection and diagnostic functions to improve the stability of the device and CAN. In addition, SIT1043 has five working modes: normal mode, silent mode, standby mode, go-to-sleep mode and sleep mode. It supports local wake-up and remote wake-up in low power mode. The provided low power mode management can greatly save the power of CAN bus application system.
●FEATURES
■Fully compatible with the ISO 11898-2:2016 standard
■Low power sleep mode and standby mode
■Remote wake-up function and local wake-up function
■±58V BUS protection
■±30V receiver common mode input voltage
■I/O pin supports 3.3V/5V MCU
■Driver (TXD) dominant timeout function
■Under voltage protection on VBAT, VCC and VIO pins
■High-speed CAN, support 5Mbps CAN with Flexible Data-Rate
■Sleep mode INH output pin with power disable function
■-40℃ to 150℃ junction temperature range with over temperature protection
■The typical loop delay from TXD to RXD is less than 100ns
■High ElectroMagnetic Immunity
■Transceiver in unpowered state disengages from the bus
■With SPLIT pin for common-mode stabilization
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
SOP14;DFN4.5×3.0-14;DFN14 |
|
|
English Chinese Chinese and English Japanese |
|
|
2022.04 |
|
|
V1.0 |
|
|
|
|
|
1.8 MB |
- +1 Like
- Add to Favorites
Recommend
- SIT Newly Produces Interface Chip SIT1043Q with Board Sleep and Wake up，Which is Suitable for 12V or 24V Application Systems
- Sekorm Received An Award for Helping SIT Make A Great Breakthrough in the Automotive and Industrial Markets
- SIT Announced a Dual Channel LIN Physical Layer Transceiver SIT1022Q，Suitable for In-vehicle Networks with A Transmission Rate of 1kbps To 20kbps
- Keysight Lab Provides Standardizing Testing for DENT
- Looking Back Memory Chip and Forward as 2024 Approaches
- Exxelia Ohmcraft Custom Resistors Help Ensure Reliability of Most-deployed Anti-tank Missile
- Amphenol-GIS Busbars for SPD Type 2 to Meet a Fast and Pre-assembled Wiring
- The DS-Series Displacement sensors from ElastiSense are developed especially for bridge, adding safety and reducing costs
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
