SIT1022Q Dual channel Local Interconnect Network (LIN) transceiver
■SIT1022Q is a dual channel Local Interconnect Network (LIN) physical layer transceiver that compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, ISO 17987-4:2016 (12V) and SAE J2602 standards. It is mainly suitable for in-vehicle networks with a transmission rate of 1kbps to 20kbps. SIT1022Q controls the state of the LINx bus through the TXDx pin, and can convert the data stream sent by the protocol controller into a bus signal with the best slew rate and waveform shaping to minimize electromagnetic radiation emission (EME). The LIN bus output pin has an internal pull-up resistor. Only when used as a master node, the LIN bus port needs to be pulled up to VBAT through an external resistor in series with a diode. SIT1022Q receives the data stream on the bus through the LINx pin, and transmits the data to the external microcontroller through the receiver’s output pin RXDx.
■SIT1022Q can operate from 5.5V to 27V and supports 12V applications. SIT1022Q has an extremely low quiescent current consumption in sleep mode and standby mode. It can quickly minimize power consumption in the event of a failure. The device can be placed in normal mode via a signal on the pin SLPx_N.
●FEATURES
■Compliant with LIN 2.x/ISO 17987-4:2016 (12V)/SAE J2602
■AEC-Q100 qualified
■Compatible with K line
■Integrated over-temperature protection function (thermal shutdown)
■Integrated dominant time out function
■Integrated bus pull-up slave termination resistor
■Bus current limiting protection
■Supply undervoltage detection
■Very low power consumption sleep mode and standby mode
■Support LIN bus remote wake-up
■LIN data transmission rate up to 20kbps
■Available in SOP14, DFN4.5×3-14 and QFN24 packages
dual channel Local Interconnect Network physical layer transceiver 、 dual channel interface chip 、 dual-channel LIN transceiver 、 dual channel LIN physical layer transceiver |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOP14;DFN4.5×3-14;QFN24 |
|
English Chinese Chinese and English Japanese |
|
January 2024 |
|
V1.4 |
|
|
|
1.6 MB |
- +1 Like
- Add to Favorites
Recommend
- SIT Announced a Dual Channel LIN Physical Layer Transceiver SIT1022Q,Suitable for In-vehicle Networks with A Transmission Rate of 1kbps To 20kbps
- Sekorm Received An Award for Helping SIT Make A Great Breakthrough in the Automotive and Industrial Markets
- SIT Newly Produces Interface Chip SIT1043Q with Board Sleep and Wake up,Which is Suitable for 12V or 24V Application Systems
- Keysight Lab Provides Standardizing Testing for DENT
- Looking Back Memory Chip and Forward as 2024 Approaches
- Exxelia Ohmcraft Custom Resistors Help Ensure Reliability of Most-deployed Anti-tank Missile
- Amphenol-GIS Busbars for SPD Type 2 to Meet a Fast and Pre-assembled Wiring
- The DS-Series Displacement sensors from ElastiSense are developed especially for bridge, adding safety and reducing costs
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.