CHT-STROMBOLI High-temperature,Medium-voltage isolated DC-DC Converter Application Note
■This document describes in details the implementation of a constant frequency current mode flyback isolated DC/DC converter CHT-STROMBOLI based on CISSOID’s high-temperature devices CHT-MAGMA, CHT-NMOS8010, CHT-NMOS4020 and CHT-SNMOS80. Small and medium signal diodes are created by using the bulk diode of high temperature MOSFET:
▲CHT-SNMOS80 with gate and source shorted.
■All CISSOID components are rated from -55℃ to +225℃ (Junction temperature. The CHT-STROMBOLI reference design is specified -55 to 175℃ with brief excursions to 225℃. The passive components are rated at +150℃ but will permit brief excursions above this value, with a reduced reliability.
■The CHT-STROMBOLI can be operated from 15V up to 40V and the implemented topology ensures a cycle-by-cycle current limitation, making the converter very robust to every fault condition present at the output.
■A voltage input comparator (Under Voltage Lockout) switches off the converter when operated below the minimum specified voltage. This provides a small input power and a reliable soft start under these conditions.
■Two symmetric outputs are provided and an accurate voltage feedback guarantees a high stability over the load or the input voltage variations, making the design very robust to all kind of external perturbations.
■The detailed performances of the CHT-STROMBOLI can be found in the related product datasheet. The global specifications are as follows:
▲ Input voltage range: 15 to 40V
▲ Output voltage: symmetrical +/-12V
▲ Output power: 25W
▲ Efficiency>70% at maximum power, over the whole temperature range
▲ 150kHz center frequency
■In the following sections it is assumed that the general theory of flyback current mode converters is known. The passive elements in each block will be described.
■Figure 1 shows a generic block diagram of CHT-STROMBOLI, along on the next pages the detailed schematics of the reference design, in figure 2. The next chapters of this document will describe in details the different functionalities.
|
|
|
|
Application note & Design Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
03-Dec-2010 |
|
|
Version: 1.0 |
|
|
AN-100768 |
|
|
2.5 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
