ZJR1004 Low Noise, Low Power, Low Temperature Drift, 40V Precise Voltage Reference Preliminary Datasheet
2024-02-08
●General Description
■The ZJR1004 are a series of precision voltage references providing a variety of output voltages with very low temperature coefficient and low noise. It is ideal for applications such as precision instruments and test equipment that require high resolution (>14 bit) data acquisition. The performance of ZJR1004 is guaranteed in a wide temperature range from -40 ° C to + 125° C. Because of the low dropout feature of ZJR1004, the lowest supply voltage is just 300 mV higher than the output voltage. The maximum supply can be as high as 40 V, which simplifies the design of system power supply. ZJR1004 is a bandgap voltage reference, featuring outstanding temperature coefficient <5 ppm/ ° C and the initial accuracy < ± 0.05 %. This simplifies or sometimes eliminates the system calibration for most applications. ZJR1004 provides 8-pin SOIC and MSOP packages, and are compatible with industry standard products.
●Features
■Low Temperature Drift: 5 ppm/ ° C max
■High Accuracy: ± 0.05 % max
■Multiple Output Voltage:
▲2.048 V, 2.5 V, 3 V, 3.3 V,
▲4.096 V, 5V, 10 V
■Low Noise: 0.1 Hz to 10 Hz, 2.1 ppm_P-P
■Strong driving capability: typical 20mA, min 17mA
■Wide Supply Range: VOUT+0.3 V to 40 V
■Low Quiescent Current: 160 μ A
■Wide Temperature Range: - 40 ° C to +125 ° C
■The ZJR1004 are a series of precision voltage references providing a variety of output voltages with very low temperature coefficient and low noise. It is ideal for applications such as precision instruments and test equipment that require high resolution (>14 bit) data acquisition. The performance of ZJR1004 is guaranteed in a wide temperature range from -40 ° C to + 125° C. Because of the low dropout feature of ZJR1004, the lowest supply voltage is just 300 mV higher than the output voltage. The maximum supply can be as high as 40 V, which simplifies the design of system power supply. ZJR1004 is a bandgap voltage reference, featuring outstanding temperature coefficient <5 ppm/ ° C and the initial accuracy < ± 0.05 %. This simplifies or sometimes eliminates the system calibration for most applications. ZJR1004 provides 8-pin SOIC and MSOP packages, and are compatible with industry standard products.
●Features
■Low Temperature Drift: 5 ppm/ ° C max
■High Accuracy: ± 0.05 % max
■Multiple Output Voltage:
▲2.048 V, 2.5 V, 3 V, 3.3 V,
▲4.096 V, 5V, 10 V
■Low Noise: 0.1 Hz to 10 Hz, 2.1 ppm_P-P
■Strong driving capability: typical 20mA, min 17mA
■Wide Supply Range: VOUT+0.3 V to 40 V
■Low Quiescent Current: 160 μ A
■Wide Temperature Range: - 40 ° C to +125 ° C
- +1 Like
- Add to Favorites
Recommend
More>
- 16-bit Pseudo Differential SAR ADC ZJC2012 with Throughput Up to 250 kSPS and 1.8V/2.5V/3V/5V Logic Interface
- Firstohm‘s Superior Anti-Surge Wire Wound Axial Resistor SSWA Series With a low-temperature coefficient and a wide temperature range
- Positive Voltage Output, Three-pin Regulators SR72XXMM with High Input Voltage of 15V and Low Temperature Coefficient
- Littelfuse Introduces Stocked Standard Supply of Negative Temperature Coefficient NTC Thermistor Series for Critical Temperature Control
- 650V/50A IGBT BLG50T65FLA with Positive Temperature Coefficient, Optimized Switching Performance and Low Gate Charge Qg
- TDK Worldwide Availability of The Industry’s First 7-Axis Motion and Pressure Sensor ICM-2078 Targeting The Consumer Electronic, Drone, and IOT Markets
- Flexible Interface of the ZSSC3241 Enhanced Sensor Signal Conditioner Enables Bridge as Temperature Sensor
- ZP Series AC DC Converter: Efficient Power Conversion Solution
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.