PSR 系列光电传感器使用说明书 (PSR series Photoelectric sensor Operation Instruction)

2023-11-29
●注意事项
■传感器最大允许电源电压是额定电压的10%,通电前请确认供电电源电压小于最大允许值
■传感器从接通电源到正常检测的时间为100ms,请确保通电后100ms后再使用
■传感器与负载使用不同电源时,请确保先接通传感器的电源
■不使用传感器时,建议优先切断负载上的电源,再切断传感器的电源
■安装时请勿使传感器受剧烈外力(如锤击打等),这样有可能破坏传感器性能
■清洗时避免使用稀释剂、酒精或其他有机溶剂
●Precautions
■The maximum allowable voltage of the sensor is 10% of the rated voltage. Please confirm that the supply voltage is less than the maximum allowable value before powering on.
■The time from powering-on to normal detection of the sensor is 100ms, please ensure that the sensor is used after 100ms of powering-on.
■When using different power sources for the sensor and load, be sure to turn on the power of the sensor first.
■When the sensor is not used, it is recommended to cut off the power of the load first and then turn off the power of the sensor.
■When installing do not subject the sensor to severe external force (such as hammering, etc.), which may damage the sensor performance.
■Avoid using thinner, alcohol or other organic solvents when cleaning.

LANBAO

PSR 系列PSRPSR seriesPSR-TM20DPSR-TM20D-E2PSR-TM20DNBPSR-TM20DNB-E2PSR-TM20DPBPSR-TM20DPB-E2PSR-PM3DNBRPSR-PM3DNBR-E2PSR-PM3DPBRPSR-PM3DPBR-E2PSR-BC30DNBRPSR-BC30DNBR-E2PSR-BC30DPBRPSR-BC30DPBR-E2PSR-YC10DNBRPSR-YC10DNBR-E2PSR-YC10DPBRPSR-YC10DPBR-E2

More

Part#

光电传感器传感器Photoelectric sensorsensor发射器接收器EmitterReceiver偏振反射型传感器polarized sensor

More

More

User's Guide

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

2021/9/30

V2.0

PS-PSR-2109LB

2.5 MB

- The full preview is over,the data is 2 pages -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: