Jowatac®471.50/54 Foam Bonding Adhesive
■Good spraying properties, good initial adhesion, practically no residual tack, good heat resistance.
■Application on both surfaces by spraying.
■To be processed from pressurized container or barrel pump either directly or via a circulation system. Avoid all contact of pressurized container, pump and ductwork with galvanized metals or zinc alloys. The adhesive reacts aggressively with the metal and can no longer be used.
▲Material pressure [bar]: 0.5 – 3
▲Spray pressure [bar]: 4 – 6
▲Nozzle ⌀ [mm]: approx. 1.5
▲Open time [min]:
◆1 – 7 (application to one surface)
◆1 – 25 (application to both surfaces)
■The processing temperature of the adhesive and of the materials to be bonded should be between 15 and 25 °C.
■Appearance:
▲final digit 0 = colorless
▲final digit 4 = red
■Key data measured according Jowat test methods.
|
Foam Bonding Adhesive 、 Styrene copolymer adhesive 、 adhesive |
|
|
[ foam materials ][ molded foam ][ upholstery wadding ][ wood ][ hardboard ][ particleboard ][ cardboard ][ rubberized hair ][ upholstery materials ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
03/22 |
|
|
|
|
|
|
|
|
219 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
