Jowat® 195.79 Crosslinking Agent
●Typical Key Data Directions for Use:
■Contains plasticizers.
■This crosslinking component will substantially increase the adhesive properties of reactive dispersions and substrates.
■A declaration concerning the food contact status of the product is available upon request.
■Add the crosslinking component to the respective dispersion while stirring (spiral drill attachment). This guarantees that the crosslinking agent is mixed homogenously; careful mixing is a prerequisite for good lamination results. Mixing ratio: 5 parts by weight of crosslinking agent Jowat® 195.79, and 100 parts by weight of the emulsion. Depending on the requirements, the amount of crosslinking agent added may vary from 3 to 8 %. Max. pot life: approx. 4 hours. After that time, the crosslinking agent will no longer be efficient. Since this agent undergoes a continuous loss in effectivity, the results will be best immediately after mixing. To ensure fast and uninterrupted processing, the amount to be mixed should therefore be limited. Containers used to premix with the crosslinking agent Jowat® 195.79 may not be closed since they might burst (formation of CO₂).
■Please, refer for further information on handling and for guidelines to the respective material safety data sheet and processing instructions.
■Key data measured according Jowat test methods.
■Our Application Technology Department and our Application Specialists will provide technical data to assist you in your choice of an appropriate product for your requirements. Please observe the information in the section “Remarks.”
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2022/11/30 |
|
|
|
|
|
|
|
|
193 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
