Jowacoll® ER 147.00 Emission-reduced foil adhesive
■Good mechanical processing characteristics, fast setting, good heat resistance.
■We recommend that all materials coming into contact with the glue are made of high-quality stainless steel (German standard V2A according to DIN EN 10027 – W-No. 1.4301 or better) or of inert plastics, e.g. Teflon, PP, polyamide. Avoid contact with other metals like zinc, brass, copper or aluminium. For more information, contact the equipment manufacturer or our technical service.
■The adhesive is applied one-sided to the base boards (lamination) or to the wrapping material.
■During storage, the viscosity of the product may increase due to chemical reactions of the ingredients that cannot be influenced. Higher storage temperatures promote that increase in viscosity. We therefore recommend using a suitable tool to stir the product before use. This reduces the viscosity.
■Minimum temperature for materials, glue, and room air [°C]: 15 (not identical with minimum film-forming temperature)
■Min. film-forming temperature [°C]: approx. 2 ± 1 (Jowat test method)
■Appearance of the glue film: beige
■Classification according to EN 204: not applicable
■Density at 20 °C [g/cm³]: approx. 1.35 ± 0.02 (Jowat test method)
■Application amount [g/m²]: approx. 95 ± 25
■Open assembly time at RT [min]: up to 3 (Jowat test method)
■Our Application Technology Department and our Application Specialists will provide technical data to assist you in your choice of an appropriate product for your requirements. Please observe the information in the section “Remarks”.
[ PVC foils ][ decor paper foils ][ particleboard ][ hardboard ][ plywood ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
02/21 |
|
|
|
|
|
205 KB |
- +1 Like
- Add to Favorites
Recommend
- Jowat Presents a New Premium-Class Unfilled PO Hot Melt Adhesive Jowat-Toptherm® 237.50
- Adhesive Expert Jowat Facilitates Kitchen Manufacturer Nolte Küchen‘s Successful Product Changeover to Jowat Adhesive Alternatives
- Jowat‘s Powerful PUR Hot Melt Adhesive Jowatherm-Reaktant® 609.60 Sets New Benchmarks in Flat Lamination
- Jowat Low-temperature Product Adhesive Jowat-Toptherm® 851.99, Suited for Packaging Meal Kits and Ensured Significant Energy Savings
- Jowat to Showcase Comprehensive Packaging Adhesives at FRUIT LOGISTICA
- Jowat Offers Precise Industrial Adhesives with High Initial Strength for Efficient Packaging Lines
- Jowat SE Builds Manufacturing Facility in China, Optimizing Manufacturing Network and Supply Chains for Asia-Pacific Market
- Hazard-free Jowatherm-Reaktant® PUR Hot Melt Adhesives, Sustainable Solutions for Lamination and Edgebanding
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.