TECHNICAL DATA SHEET – DENSIT® WEARCAST 2000 HT CHEMICALLY BONDED CORUNDUM-CERAMIC
■Densit® WearCast 2000 HT wear resistant linings provide superior protection against heavy erosive wear at temperatu- res up to 1200°C (2190°F).
●SPECIFICATION
■Install mesh
■Install or build mould
■Mix dry compound with water and fibres
■Add water and mix for 6 minutes
■Add appropriate steel fibres* and mix another 3 minutes
■Pour mix into mould under vibration
■Remove mould after adequate curing time
●Densit® WearCast 2000 HT is a castable one-component ready-mix delivered in 25 kg bags.
●The bags must be stored on a dry stock to maintain the good properties of the compound. The guaranteed shelf life is 14 months from production date. A paddle mixer must be used for mixing the compound. A significant change in consistency of the material (from dry to plastic) must be observed within 3 minutes from addition of water. Avoid Densit® compound to make contact with aluminium or galvanised steel. Densit® WearCast 2000 HT should be cast in suitable moulds with adequate reinforcement like steel bars and expanded metal mesh.
|
CHEMICALLY BONDED CORUNDUM-CERAMIC 、 castable one-component ready-mix |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
04/2021 |
|
|
v2 |
|
|
|
|
|
243 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
