MLX91218 High Speed Current Sensor IC with OCD
■The MLX91218 is a monolithic Hall-effect sensor utilizing the IMC-Hall® technology. The sensor provides an analog output voltage proportional to the applied magnetic flux density parallel to the IC surface.
■The transfer characteristic of the MLX91218 is factory trimmed over temperature, and is programmable (offset, sensitivity, filtering, internal overcurrent threshold) during end-of-line customer calibration. With the 400kHz bandwidth and fast response time, it is particularly adapted for high speed applications such as inverters and converters where fast response time due to fast switching is required.
■In a typical current sensing application, the sensor is used in combination with a U-shaped shield which facilitates the mechanical assembly of the current sensor over traditional ferromagnetic cores. This shield is recommended to be laminated for high bandwidth applications. The MLX91218 can then be mounted over the bus bar and separated from it by the PCB. As the shield does not serve the primary purpose of concentration, it can be made smaller and lighter than ferromagnetic cores without losing signal thanks to the integrated magnetic concentrator (IMC) depicted also in Figure 1. As a result, dense power electronics can be achieved enabling system savings and surface mount assembly.
●Features and Benefits
■IMC-Hall® Technology
■Very High Field and Extra High Field variants
■End-of-line programmable sensor
■Flexible Supply Voltage with factory selectable 5V or 3.3V mode
■Selectable analog output: Ratiometric or fixed (Vref)
■Measurement range from ±8 to ±333mT
■Wideband sensing: DC to 400kHz
■Very short response time (2μs)
■High linearity down to ±0.5% full scale
■AEC-Q100 – Grade 0 Automotive Qualified
■Very low thermal drift for wide temperature range
▲Offset drift (<5mV)
▲Sensitivity drift (<1.5%)
■Dual overcurrent detection
▲Internal threshold
▲External threshold
■RoHS compliant
■SOIC-8 package
■MSL-3
|
MLX91218 、 MLX91218LDC-ARV-500-RE 、 MLX91218LDC-ARV-300-RE 、 MLX91218LDC-ARV-301-RE 、 MLX91218LDC-ARV-303-RE 、 MLX91218LDC-AFV-204-RE 、 MLX91218LDC-ARX-501-RE 、 MLX91218LDC-ARX-300-RE 、 MLX91218LDC-ARX-301-RE 、 MLX91218LDC-ARV-501-RE |
|
|
High Speed Current Sensor IC 、 monolithic Hall-effect sensor 、 sensor |
|
|
[ battery-management system ][ BMS ][ High Voltage Traction Motor Inverter ][ 48V Boost Recuperation Inverter ][ Phase current measurement ][ DC link current measurement ][ DCDC Converter ][ Smart Battery Junction Boxes ][ Smart Fuse Overcurrent Detection ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
SOIC-8 |
|
|
English Chinese Chinese and English Japanese |
|
|
2 March 2023 |
|
|
Revision 003 |
|
|
3901091218 |
|
|
1.7 MB |
- +1 Like
- Add to Favorites
Recommend
- Melexis Unveils Automotive 200-2000A Current Sensors with Integrated Overcurrent Detection
- Melexis Announces an Exclusive License Agreement with Chronoptics to Further Enhance Its Time-of-flight Offering
- Melexis Announces World-first Combined Sensor MLX91805 for Smart Tires
- Melexis Reveals High-accuracy Current Sensors Optimized for Affordable E-mobility
- Melexis Unveils The Next Generation of Its Market-leading Motorcycle Fuel Pump Controller
- Melexis Pushes Back the Boundaries of ToF Technology for Automotive Applications by MLX75027
- Melexis VGA ToF Sensor IC MLX75027 the Full Potential of Automotive 3D ToF Imaging
- Melexis MLX90371——Gen III Triaxis® Rotary and Linear Position Sensor IC (Analog or PWM Output)
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
