RH4Z2501 IO-Link transceiver with integrated protection

2023-09-21
●The RH4Z2501 is a line driver/level shifter IC for IO- Link communication with integrated protection. It addresses the IO-Link device physical layer for sensors and actuator systems. The IC can also be used as single channel master.
●For device configuration and status reading, an OWI communication interface is available.
●The output drivers allow push-pull operation, with a maximum RDSON of less than 2.5Ω for all operational temperatures.
●The RH4Z2501 is designed in a powerful CMOS mixed-signal technology that allows short supply voltage peaks up to 60V.
●Features
■Voltage supply range from 9V to 36V.
■Over-voltage peak robustness of ±60V.
■Configurable driver output current 50mADC to 400mADC.
■RDSON of less than 2.5Ω.
■Adjustable driver slew rate.
■Integrated Wake-up detection.
■MCU assisted Wake-up generation (typ. 700mA).
■OWI digital communication and calibration interface.
■Integrated Linear Voltage Regulators 3.3V and 5V.
■Ambient Temperature range -40°C to 125°C.
■Glitch filter for receiver.
■Integrated protection:
◆±1.25kV/2.5A (peak) surge protection for L+, CQ, GND/L- (8/20 μs pulse acc. IEC 61000-4-5).
◆Reverse polarity protection for L+, CQ, GND/L-
■On-chip diagnostics:
◆Over temperature detection.
◆Supply voltage monitor.
◆Broken chip detection.

Renesas

RH4Z2501RH4Z2501BJ3GNM#HD0RH4Z2501BJ3GNM#HD1RH4Z2501BJ8GBM#HD0RH4Z2501BJ8GBM#HD1

More

Part#

IO-Link transceiverline driver/level shifter ICuniversal cable driver

More

24V line driver/level shifter ]IO-Link-compliant devices ]IO-Link-compliant masters ]

More

Datasheet

More

More

Please see the document for details

More

More

DFN12;WLCSP;DFN

English Chinese Chinese and English Japanese

Jun.8.23

Rev. 1.00

R36DS0032ED0100

2.4 MB

- The full preview is over. If you want to read the whole 30 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: