FSC-BW121 Bluetooth 5.0 +WLAN 802.11 a/b/g/n/ac Module Datasheet

2023-08-30
●Overview
■FSC-BW121 is a Wi-Fi / Bluetooth combo module that support 1-stream 802.11ac solutions with Multi-user MIMO (Multiple-Input, Multiple-Output) STA mode with integrated Bluetooth Smart Ready controller, SDIO (SDIO 1.1/2.0/3.0) interface, and HS-UART mixed interface. It combines a WLAN MAC, a 1T1R capable WLAN baseband, and RF in s single chip. It provides a complete solution for a high-performance integrated wireless and Bluetooth device.
■For legacy compatibility, Direct Sequence Spread Spectrum (DSSS), Complementary Code Keying (CCK) and OFDM baseband processing are included to support all IEEE 802.11b, 802.11g and 802.11a data rates. Differential phase shift keying modulation schemes, DBPSK and DQPSK with data scrambling capability are available, and CCK provides support for legacy data rates, with long or short preamble. The high speed FFT/IFFT paths, combined with BPSK, QPSK, 16QAM, 64QAM and 256QAM modulation of the individual subcarriers, and rate compatible coding rate of 1/2, 2/3, 3/4, and 5/6, provide up to 433.3Mbps for IEEE 802.11ac MIMO OFDM.
■FSC-BW121 builds in an enhanced signal detector, an adaptive frequency domain equalizer, and a soft- decision Viterbi decoder to alleviate severe multi-path effects and mutual interference in the reception of multiple streams. Robust interference detection and suppression are provided to protect against Bluetooth, cordless phone, and microwave oven interference.
■FSC-BW121 supports fast receiver Automatic Gain Control (AGC) with synchronous and asynchronous control loops among antennas, antenna diversity functions, and adaptive transmit power control functions to obtain better performance in the analog portions of the transceiver.
■FSC-BW121 MAC supports 802.11e for multimedia applications, 802.11i and WAPI (Wireless Authentication Privacy Infrastructure) for security, and 802.11n/802.11ac for enhanced MAC protocol efficiency. Using packet aggregation techniques such as A-MPDU with BA and A-MSDU, protocol efficiency is significantly improved. Power saving mechanisms such as Legacy Power Save, U-APSD, and MIMO power saving reduce the power wasted during idle time, and compensate for the extra power required to transmit MIMO OFDM. FSC-BW121 provides simple legacy, 20MHz/40MHz/80MHz co-existence mechanisms to ensure backward and network compatibility.
■FSC-BW121 Bluetooth controller complies with Bluetooth core specification v5.0, and supports dual mode (BR/EDR + Low Energy Controllers). It is compatible with previous versions, including v2.1 + EDR. For BR/EDR, it supports scatternet topology and allows active links in slave mode, and active links in master mode. For Low Energy, it supports multiple states and allows active links in master mode. The links in BR/EDR and LE can be active simultaneously.

FEASYCOM

FSC-BW121

More

Part#

Bluetooth 5.0 +WLAN 802.11 a/b/g/n/ac ModuleWi-Fi / Bluetooth combo module

More

multimedia applications ]Internet-of-Things Applications ]IoT Applications ]Home Automation ]Building Automation ]Low-Power Video Cameras ]Thermostats ]Access Control ]Electronic Locks ]E-Locks ]Asset Tracking ]Real Time Location System ]RTLS ]Tags ]Cloud Connectivity ]Internet Gateway ]Appliances ]Security Systems ]Smart Energy ]Industrial Control ]Smart Plug ]Metering ]Wireless Audio ]IP Network Sensor Nodes ]Medical Devices ]Car audio system ]Car video system ]

More

Datasheet

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

2022/09/20

Version 1.8.1

5.1 MB

- The full preview is over. If you want to read the whole 46 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: