R9A06G061 PLC Modem LSI

2023-06-06
■Overview
●R9A06G061 is a modem LSI for narrow-band power line communications (Narrow Band PLC). The R9A06G061 is a product that optimizes performance and functionality (small package, low power, low cost) and provides demodulation signal processing (physical layer) for software-based PLCs based on a high-performance DSP with an MCU (link layer) (ARM® Cortex™-M0+) to provide a flexible and inexpensive PLC solution.
■ Features
▼ High-performance DSP
●Handle PHY layer of power line communication etc.
●Maximum operating frequency: 276MHz
●IRAM: 128KB, DRAM: 128KB
●Dedicated instructions for Viterbi and Reed Solomon processing, AES128 encryption/decryption processing,
and others
▼ MCU (ARM® Cortex™-M0+)
●Handle protocol conversion processing for the external MCU interface etc.
●Maximum operating frequency: 92MHz
●RAM: 32KB
●CRC Operation H/W Core
▼ Analog front-end (AFE) circuit
●DAC
◆Delta Sigma DA converter
◆ ENOB:11bit
●Variable Output Amplifiers
◆ 114dBuVrms output (high output mode, 50-ohm drive for differential terminals)
◆Gain variable, in 3dB steps
●Variable Receiving Amplifiers
◆Dynamic range: -18dB to +60dB, 2dB steps
◆ AGC with DSP control
●ADC
◆ Delta Sigma ADC
◆ ENOB:10bit
▼ A variety of External IOs
◆ UART(1ch), SPIs(1ch), Serial Flash IF(Single/Dual)
◆ PORT(10ch) (* however, exclusive use with above peripherals)
▼ Built-in regulator: 3.3V input, 1.15V DC-DC converter
▼ Supply voltage:3.3V
▼ PKG:40-pin QFN 6mm x 6mm, 0.5mm pitch
▼ Operating temperature
●-40 to+ 85 degrees

Renesas

R9A06G061R9A06G061GNP

More

Part#

modem LSIPLC modem LSI

More

narrow-band power line communications ]Narrow Band PLC ]

More

Datasheet

More

More

Please see the document for details

More

More

QFN;P-HVQFN40;PVQN0040KK-A

English Chinese Chinese and English Japanese

October 21, 2021

Rev.1.05

R19DS0105EJ0105

1.7 MB

- The full preview is over. If you want to read the whole 25 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: