Renesas Synergy™ S124 Sensor Panel Board User Guide
●Introduction
■This User guide describes about the Renesas Sensor Panel Board. In this Sensor Panel solution, Renesas Synergy™ S124 Microcontroller Group and Renesas RL78/G1D Bluetooth Low Energy (hereafter called BLE) are the highlighted Components. Using this Sensor Panel Board, developers can easily start to evaluate on Renesas Lighting solution, using RL78/G1D Bluetooth® wireless connectivity and Renesas Synergy™ S124 device including Temperature sensor, Light sensor and necessary user interface.
●Overview
■The Sensor Panel Board uses the Renesas Synergy™ S124, 32-MHz Arm® Cortex®-M0+ microcontroller with 256 KB of code flash, 24 KB of SRAM, and 4 KB of data flash. It has two push button switches, one reset button, and three LEDs for user interface; Bluetooth® RY7011 module and onboard micro-B USB for communication; and one PMODTM connector for expansion. For interacting with surrounding environment, it also includes Temperature Sensor, Light sensor, passive infrared (PIR) sensor, Reed Switch (Tilt Switch) with two LED indicators, Hall Effect Switch, and two open drain outputs. There are a 5 volt center positive DC power connector (cylindrical male diameter 5.5mm) and the same micro-B USB connector from external power and has internal power supply provided by Li-ion Battery (Type: NCR18650BF or equivalent) with battery charger including 3.3 volt regulated output to provide onboard power. For development, the board has two Programming/Debugging contactors: standard 9-pin JTAG contactor for S124 device and 14-pin (2x7, 0.1 inch) connector for RY7011 module. Two 4-screw terminals are included for two general purpose switch inputs and two open drain output as well.
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
Nov 15, 2017 |
|
Rev.1.00 |
|
R12AN0074EU0100 |
|
2.3 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.